/* * f8wZCL.cfg * * Compiler command-line options used to define a ZigBee Cluster * Library (ZCL) poject. To move an option from here to the project * file, comment out or delete the option from this file and enter * it into the "Define Symbols" box under the Preprocessor tab of * the C/C++ Compiler Project Options. New user defined options may * be added to this file, as necessary. * * Each macro is prefixed with '-D'. The entries are to be constructed * as if they are to be on the compiler command line invocation (which * they are). */ /**************************************** * The following are for Foundation only ****************************************/ /* ZCL Read enables the following commands: * 1) Read Attributes * 2) Read Attributes Response */ -DZCL_READ /* ZCL Write enables the following commands: * 1) Write Attributes * 2) Write Attributes Undivided * 3) Write Attributes Response * 4) Write Attributes No Response */ -DZCL_WRITE /* ZCL Report enables the following commands: * 1) Configure Reporting * 2) Configure Reporting Response * 3) Read Reporting Response * 4) Read Reporting Configuration Response * 5) Report Attributes */ //-DZCL_REPORT /* ZCL Discover enables the following commands: * 1) Discover Attributes * 2) Discover Attributes Response */ //-DZCL_DISCOVER /********************************************** * The following are for General clusters only **********************************************/ /* ZCL Basic enables the following command: * 1) Reset to Factory Defaults */ -DZCL_BASIC /* ZCL Identify enables the following commands: * 1) Identify Query * 2) Identify Query Response */ -DZCL_IDENTIFY /* ZCL Groups enables the following commands: * 1) Add Group * 2) View Group * 3) Get Group Membership * 4) Remove Group * 5) Remove All Groups * 6) Add Group If Identifying * 7) Add Group Response * 8) View Group Response * 9) Get Group Membership Response * 10) Remove Group Response */ //-DZCL_GROUPS /* ZCL Scenes enables the following commands: * 1) Add Scene * 2) View Scene * 3) Remove Group * 4) Remove All Groups * 5) Store Scene * 6) Recall Scene * 7) Get Scene Membership * 8) Add Scene Response * 9) View Scene Response * 10) Remove Scene Response * 11) Remove All Scenes Response * 12) Store Scene Response * 13) Get Scene Membership Response */ //-DZCL_SCENES /* ZCL On/Off enables the following commands: * 1) On * 2) Off * 3) Toggle */ -DZCL_ON_OFF /* ZCL Level Control enables the following commands: * 1) Move to Level * 2) Move * 3) Step */ //-DZCL_LEVEL_CTRL /* ZCL Alarms enables the following commands: * 1) Reset Alarm * 2) Reset All Alarms * 3) Get Alarm * 4) Reset Alarm Log * 5) Alarm * 6) Get Alarm Response */ //-DZCL_ALARMS /* ZCL Location enables the following commands: * 1) Set Absolute Location * 2) Set Device Configuration * 3) Get Device Configuration * 4) Get Location Data * 5) Device Configuration Response * 6) Location Data Response * 7) Location Data Notification * 8) Compact Location Data Notification * 9) RSSI Ping */ //-DZCL_LOCATION /* ZCL Door Lock enables the following commands: * 1) Door Lock * 2) Door Lock Response * 3) Door Unlock * 4) Door Unlock Response */ //-DZCL_DOORLOCK /* ZCL Window Covering enables the following commands: * 1) Up / Open * 2) Down / Close * 3) Stop * 4) Go to Lift Setpoint * 5) Go to Lift Value * 6) Go to Lift Percentage * 7) Go to Tilt Setpoint * 8) Go to Tilt Value * 9) Go to Tilt Percentage * 10) Program Setpoint */ //-DZCL_WINDOWCOVERING /****************************************** * The following are for key establishment *****************************************/ /* * ZCL_KEY_ESTABLISH enables the ZCL Key Establishment Cluster */ -DZCL_KEY_ESTABLISH /* The following constants are used to config the time-out value, * i.e. during the key establishment, how long should the other * device to wait before it times out the key establishment session */ -DZCL_KEY_ESTABLISHMENT_KEY_GENERATE_TIMEOUT=4 -DZCL_KEY_ESTABLISHMENT_MAC_GENERATE_TIMEOUT=10 -DZCL_KEY_ESTABLISHMENT_EKEY_GENERATE_TIMEOUT=10 /********************************************************** * The following are for Security and Safety clusters only **********************************************************/ /* ZCL Zone enables the following commands: * 1) Zone Status Change Notification * 2) Zone Enroll Request * 3) Zone Enroll Response */ //-DZCL_ZONE /* ZCL ACE enables the following commands: * 1) Arm * 2) Bypass * 3) Emergency * 4) Fire * 5) Panic * 6) Get Zone ID Map * 7) Get Zone Information * 8) Arm Response * 9) Get Zone ID Map Response * 10) Get Zone Information Response */ //-DZCL_ACE /* ZCL WD enables the following commands: * 1) Start Warning * 2) Squawk */ //-DZCL_WD /********************************************************** * The following are for SE clusters only **********************************************************/ /* ZCL_LOAD_CONTROL enables the following commands: * 1) Load Control Event * 2) Cancel Load Control Event * 3) Cancel All Load Control Event * 4) Report Event Status */ -DZCL_LOAD_CONTROL /* ZCL_SIMPLE_METERING enables the following commands: * 1) Get Profile Command * 2) Get Profile Response */ -DZCL_SIMPLE_METERING /* ZCL_PRICING enables the following commands: * 1) Get Current Price * 2) Get Scheduled Price * 3) Publish Price */ -DZCL_PRICING /* ZCL_MESSAGE enables the following commands: * 1) Display Message * 2) Cancel Message * 3) Get Last Message * 4) Message Confirmation */ -DZCL_MESSAGE /* ZCL_TUNNELING enables the following commands: * 1) Request Tunnel * 2) Request Tunnel Response * 3) Close Tunnel * 4) Transfer Data * 5) Transfer Data Error * 6) Ack Transfer Data * 7) Ready Data * 8) Get Supported Tunnel Protocols * 9) Supported Tunnel Protocols Response */ -DZCL_TUNNELING /* ZCL_PREPAYMENT enables the following commands: * 1) Select Available Emergency Credit * 2) Change Supply * 3) Supply Status Response */ //-DZCL_PREPAYMENT /* ZCL_TOU enables the following commands: * 1) Publish Calendar * 2) Publish Day Profile * 3) Publish Week Profile * 4) Publish Seasons * 5) Publish Special Days * 6) Get Calendar * 7) Get Day Profile * 8) Get Week Profiles * 9) Get Seasons * 10) Get Special Days */ -DZCL_TOU /* ZCL_DEVICE_MGMT enables the following commands: * 1) Get Change Of Tenancy * 2) Get Change Of Supplier * 3) Get Change Supply * 4) Supply Status Response * 5) Get Password * 6) Publish Change of Tenancy * 7) Publish Change of Supplier * 8) Change Supply * 9) Change Password * 10) Local Change Supply */ -DZCL_DEVICE_MGMT