182 lines
6.1 KiB
INI
182 lines
6.1 KiB
INI
|
/*
|
||
|
|
* f8wConfig.cfg
|
||
|
|
*
|
||
|
|
* Compiler command-line options used to define a TI Z-Stack ZigBee device.
|
||
|
|
* To move an option from here to the project file, comment out or delete the
|
||
|
|
* option from this file and enter it into the "Define Symbols" box under the
|
||
|
|
* Preprocessor tab of the C/C++ Compiler Project Options. New user defined
|
||
|
|
* options may be added to this file, as necessary.
|
||
|
|
*
|
||
|
|
* Each macro is prefixed with '-D'. The entries are to be constructed as if
|
||
|
|
* they are to be on the compiler command line invocation (which they are).
|
||
|
|
*
|
||
|
|
* NOTE: The RHS (Right-Hand-Side) must be quoted if there are embedded blanks.
|
||
|
|
* See the DEFAULT_KEY definition for an example.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Enable ZigBee-Pro */
|
||
|
|
-DZIGBEEPRO
|
||
|
|
|
||
|
|
/* Set to 0 for no security, otherwise non-0 */
|
||
|
|
-DSECURE=0
|
||
|
|
-DZG_SECURE_DYNAMIC=0
|
||
|
|
|
||
|
|
/* Enable the Reflector */
|
||
|
|
-DREFLECTOR
|
||
|
|
|
||
|
|
/* Default channel is Channel 11 - 0x0B */
|
||
|
|
// Channels are defined in the following:
|
||
|
|
// 0 : 868 MHz 0x00000001
|
||
|
|
// 1 - 10 : 915 MHz 0x000007FE
|
||
|
|
// 11 - 26 : 2.4 GHz 0x07FFF800
|
||
|
|
//
|
||
|
|
//-DMAX_CHANNELS_868MHZ 0x00000001
|
||
|
|
//-DMAX_CHANNELS_915MHZ 0x000007FE
|
||
|
|
//-DMAX_CHANNELS_24GHZ 0x07FFF800
|
||
|
|
//-DDEFAULT_CHANLIST=0x04000000 // 26 - 0x1A
|
||
|
|
//-DDEFAULT_CHANLIST=0x02000000 // 25 - 0x19
|
||
|
|
//-DDEFAULT_CHANLIST=0x01000000 // 24 - 0x18
|
||
|
|
-DDEFAULT_CHANLIST=0x00800000 // 23 - 0x17
|
||
|
|
//-DDEFAULT_CHANLIST=0x00400000 // 22 - 0x16
|
||
|
|
//-DDEFAULT_CHANLIST=0x00200000 // 21 - 0x15
|
||
|
|
//-DDEFAULT_CHANLIST=0x00100000 // 20 - 0x14
|
||
|
|
//-DDEFAULT_CHANLIST=0x00080000 // 19 - 0x13
|
||
|
|
//-DDEFAULT_CHANLIST=0x00040000 // 18 - 0x12
|
||
|
|
//-DDEFAULT_CHANLIST=0x00020000 // 17 - 0x11
|
||
|
|
//-DDEFAULT_CHANLIST=0x00010000 // 16 - 0x10
|
||
|
|
//-DDEFAULT_CHANLIST=0x00008000 // 15 - 0x0F
|
||
|
|
//-DDEFAULT_CHANLIST=0x00004000 // 14 - 0x0E
|
||
|
|
//-DDEFAULT_CHANLIST=0x00002000 // 13 - 0x0D
|
||
|
|
//-DDEFAULT_CHANLIST=0x00001000 // 12 - 0x0C
|
||
|
|
//-DDEFAULT_CHANLIST=0x00000800 // 11 - 0x0B
|
||
|
|
|
||
|
|
/* Define the default PAN ID.
|
||
|
|
*
|
||
|
|
* Setting this to a value other than 0xFFFF causes
|
||
|
|
* ZDO_COORD to use this value as its PAN ID and
|
||
|
|
* Routers and end devices to join PAN with this ID
|
||
|
|
*/
|
||
|
|
-DZDAPP_CONFIG_PAN_ID=0xFFA5
|
||
|
|
|
||
|
|
/* Minimum number of milliseconds to hold off the start of the device
|
||
|
|
* in the network and the minimum delay between joining cycles.
|
||
|
|
*/
|
||
|
|
-DNWK_START_DELAY=100
|
||
|
|
|
||
|
|
/* Mask for the random joining delay. This value is masked with
|
||
|
|
* the return from osal_rand() to get a random delay time for
|
||
|
|
* each joining cycle. This random value is added to NWK_START_DELAY.
|
||
|
|
* For example, a value of 0x007F will be a joining delay of 0 to 127
|
||
|
|
* milliseconds.
|
||
|
|
*/
|
||
|
|
-DEXTENDED_JOINING_RANDOM_MASK=0x007F
|
||
|
|
|
||
|
|
/* Minimum number of milliseconds to delay between each beacon request
|
||
|
|
* in a joining cycle.
|
||
|
|
*/
|
||
|
|
-DBEACON_REQUEST_DELAY=100
|
||
|
|
|
||
|
|
/* Mask for the random beacon request delay. This value is masked with the
|
||
|
|
* return from osal_rand() to get a random delay time for each joining cycle.
|
||
|
|
* This random value is added to DBEACON_REQUEST_DELAY. For example, a value
|
||
|
|
* of 0x00FF will be a beacon request delay of 0 to 255 milliseconds.
|
||
|
|
*/
|
||
|
|
-DBEACON_REQ_DELAY_MASK=0x00FF
|
||
|
|
|
||
|
|
/* Jitter mask for the link status report timer. This value is masked with the
|
||
|
|
* return from osal_rand() to add a random delay to _NIB.nwkLinkStatusPeriod.
|
||
|
|
* For example, a value of 0x007F allows a jitter between 0-127 milliseconds.
|
||
|
|
*/
|
||
|
|
-DLINK_STATUS_JITTER_MASK=0x007F
|
||
|
|
|
||
|
|
/* in seconds; set to 0 to turn off route expiry */
|
||
|
|
-DROUTE_EXPIRY_TIME=30
|
||
|
|
|
||
|
|
/* This number is used by polled devices, since the spec'd formula
|
||
|
|
* doesn't work for sleeping end devices. For non-polled devices,
|
||
|
|
* a formula is used. Value is in 2 milliseconds periods
|
||
|
|
*/
|
||
|
|
-DAPSC_ACK_WAIT_DURATION_POLLED=3000
|
||
|
|
|
||
|
|
/* Default indirect message holding timeout value:
|
||
|
|
* 1-65535 (0 -> 65536) X CNT_RTG_TIMER X RTG_TIMER_INTERVAL
|
||
|
|
*/
|
||
|
|
-DNWK_INDIRECT_MSG_TIMEOUT=7
|
||
|
|
|
||
|
|
/* The number of simultaneous route discoveries in network */
|
||
|
|
-DMAX_RREQ_ENTRIES=8
|
||
|
|
|
||
|
|
/* The maximum number of retries allowed after a transmission failure */
|
||
|
|
-DAPSC_MAX_FRAME_RETRIES=3
|
||
|
|
|
||
|
|
/* Max number of times retry looking for the next hop address of a message */
|
||
|
|
-DNWK_MAX_DATA_RETRIES=2
|
||
|
|
|
||
|
|
/* Number of times retry to poll parent before indicating loss of synchronization
|
||
|
|
* with parent. Note that larger value will cause longer delay for the child to
|
||
|
|
* rejoin the network.
|
||
|
|
*/
|
||
|
|
-DMAX_POLL_FAILURE_RETRIES=2
|
||
|
|
|
||
|
|
/* The number of items in the broadcast table */
|
||
|
|
-DMAX_BCAST=9
|
||
|
|
|
||
|
|
/* The maximum number of groups in the groups table */
|
||
|
|
-DAPS_MAX_GROUPS=16
|
||
|
|
|
||
|
|
/* Number of entries in the regular routing table plus additional
|
||
|
|
* entries for route repair
|
||
|
|
*/
|
||
|
|
-DMAX_RTG_ENTRIES=40
|
||
|
|
|
||
|
|
/* Maximum number of entries in the Binding table. */
|
||
|
|
-DNWK_MAX_BINDING_ENTRIES=4
|
||
|
|
|
||
|
|
/* Maximum number of cluster IDs for each binding table entry.
|
||
|
|
* Note that any value other than the default value may cause a
|
||
|
|
* compilation warning but Device Binding will function correctly.
|
||
|
|
*/
|
||
|
|
-DMAX_BINDING_CLUSTER_IDS=4
|
||
|
|
|
||
|
|
/* Default security key. */
|
||
|
|
-DDEFAULT_KEY="{0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0D}"
|
||
|
|
|
||
|
|
/* Reset when ASSERT occurs, otherwise flash LEDs */
|
||
|
|
//-DASSERT_RESET
|
||
|
|
|
||
|
|
/* Set the MAC MAX Frame Size (802.15.4 default is 102) */
|
||
|
|
-DMAC_MAX_FRAME_SIZE=116
|
||
|
|
|
||
|
|
/* Minimum transmissions attempted for Channel Interference detection,
|
||
|
|
* Frequency Agility can be disabled by setting this parameter to zero.
|
||
|
|
*/
|
||
|
|
-DZDNWKMGR_MIN_TRANSMISSIONS=20
|
||
|
|
|
||
|
|
/* Compiler keywords */
|
||
|
|
-DCONST="const __code"
|
||
|
|
-DGENERIC=__generic
|
||
|
|
|
||
|
|
/****************************************
|
||
|
|
* The following are for End Devices only
|
||
|
|
***************************************/
|
||
|
|
|
||
|
|
-DRFD_RCVC_ALWAYS_ON=FALSE
|
||
|
|
|
||
|
|
/* The number of milliseconds to wait between data request polls to the coordinator. */
|
||
|
|
-DPOLL_RATE=1000
|
||
|
|
|
||
|
|
/* This is used after receiving a data indication to poll immediately
|
||
|
|
* for queued messages...in milliseconds.
|
||
|
|
*/
|
||
|
|
-DQUEUED_POLL_RATE=100
|
||
|
|
|
||
|
|
/* This is used after receiving a data confirmation to poll immediately
|
||
|
|
* for response messages...in milliseconds
|
||
|
|
*/
|
||
|
|
-DRESPONSE_POLL_RATE=100
|
||
|
|
|
||
|
|
/* This is used as an alternate response poll rate only for rejoin request.
|
||
|
|
* This rate is determined by the response time of the parent that the device
|
||
|
|
* is trying to join.
|
||
|
|
*/
|
||
|
|
-DREJOIN_POLL_RATE=440
|