Smart-agriculture-project
/
smart-green-house
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
smart-green-house/project_ZigBee/Components/stack/zdo/ZDApp.c

3048 lines
82 KiB
C
Raw Normal View History

version1版本硬件模块代码
2023-10-28 18:00:47 +08:00
/**************************************************************************************************
Filename: ZDApp.c
Revised: $Date: 2012-02-16 16:04:32 -0800 (Thu, 16 Feb 2012) $
Revision: $Revision: 29348 $
Description: This file contains the interface to the Zigbee Device Application. This is the
Application part that the user can change. This also contains the Task functions.
Copyright 2004-2012 Texas Instruments Incorporated. All rights reserved.
IMPORTANT: Your use of this Software is limited to those specific rights
granted under the terms of a software license agreement between the user
who downloaded the software, his/her employer (which must be your employer)
and Texas Instruments Incorporated (the "License"). You may not use this
Software unless you agree to abide by the terms of the License. The License
limits your use, and you acknowledge, that the Software may not be modified,
copied or distributed unless embedded on a Texas Instruments microcontroller
or used solely and exclusively in conjunction with a Texas Instruments radio
frequency transceiver, which is integrated into your product. Other than for
the foregoing purpose, you may not use, reproduce, copy, prepare derivative
works of, modify, distribute, perform, display or sell this Software and/or
its documentation for any purpose.
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
PROVIDED <EFBFBD>AS IS? WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
Should you have any questions regarding your right to use this Software,
contact Texas Instruments Incorporated at www.TI.com.
**************************************************************************************************/
/*********************************************************************
* INCLUDES
*/
#include "ZComDef.h"
#include "stdio.h"
#include "ZMac.h"
#include "OSAL.h"
#include "OSAL_Tasks.h"
#include "OSAL_PwrMgr.h"
#include "OSAL_Nv.h"
#include "AF.h"
#include "APSMEDE.h"
#include "NLMEDE.h"
#include "AddrMgr.h"
#include "ZDProfile.h"
#include "ZDObject.h"
#include "ZDConfig.h"
#include "ZDSecMgr.h"
#include "ZDApp.h"
#include "DebugTrace.h"
#include "nwk_util.h"
#include "OnBoard.h"
#include "ZGlobals.h"
#include "ZDNwkMgr.h"
#include "rtg.h"
#include "demoapp.h"
#include "ssp.h"
/* HAL */
#include "hal_led.h"
#include "hal_lcd.h"
#include "hal_key.h"
#if defined( MT_MAC_FUNC ) || defined( MT_MAC_CB_FUNC )
#error "ERROR! MT_MAC functionalities should be disabled on ZDO devices"
#endif
/*********************************************************************
* CONSTANTS
*/
#if !defined( NWK_START_DELAY )
#define NWK_START_DELAY 100 // in milliseconds
#endif
#if !defined( LEAVE_RESET_DELAY )
#define LEAVE_RESET_DELAY 5000 // in milliseconds
#endif
// Init ZDO, but hold and wait for application to start the joining or
// forming network
#define ZDO_INIT_HOLD_NWK_START 0xFFFF
#if !defined( EXTENDED_JOINING_RANDOM_MASK )
#define EXTENDED_JOINING_RANDOM_MASK 0x007F
#endif
#if !defined( BEACON_REQUEST_DELAY )
#define BEACON_REQUEST_DELAY 100 // in milliseconds
#endif
#if !defined( BEACON_REQ_DELAY_MASK )
#define BEACON_REQ_DELAY_MASK 0x007F
#endif
#define MAX_RESUME_RETRY 3
#define MAX_DEVICE_UNAUTH_TIMEOUT 5000 // 5 seconds
// Beacon Order Settings (see NLMEDE.h)
#define DEFAULT_BEACON_ORDER BEACON_ORDER_NO_BEACONS
#define DEFAULT_SUPERFRAME_ORDER DEFAULT_BEACON_ORDER
#if !defined( MAX_NWK_FRAMECOUNTER_CHANGES )
// The number of times the frame counter can change before
// saving to NV
#define MAX_NWK_FRAMECOUNTER_CHANGES 1000
#endif
// Leave control bits
#define ZDAPP_LEAVE_CTRL_INIT 0
#define ZDAPP_LEAVE_CTRL_SET 1
#define ZDAPP_LEAVE_CTRL_RA 2
// Address Manager Stub Implementation
#define ZDApp_NwkWriteNVRequest AddrMgrWriteNVRequest
#if !defined ZDO_NV_SAVE_RFDs
#define ZDO_NV_SAVE_RFDs TRUE
#endif
// Delay time before updating NWK NV data to force fewer writes during high activity.
#if ZDO_NV_SAVE_RFDs
#define ZDAPP_UPDATE_NWK_NV_TIME 700
#else
#define ZDAPP_UPDATE_NWK_NV_TIME 65000
#endif
/*********************************************************************
* GLOBAL VARIABLES
*/
#if defined( LCD_SUPPORTED )
uint8 MatchRsps = 0;
#endif
uint8 zdoDiscCounter = 1;
zAddrType_t ZDAppNwkAddr;
uint8 zdappMgmtNwkDiscRspTransSeq;
uint8 zdappMgmtNwkDiscReqInProgress = FALSE;
zAddrType_t zdappMgmtNwkDiscRspAddr;
uint8 zdappMgmtNwkDiscStartIndex;
uint8 zdappMgmtSavedNwkState;
uint16 nwkFrameCounterChanges = 0;
uint8 continueJoining = TRUE;
uint8 _tmpRejoinState;
// The extended PanID used in ZDO layer for rejoin.
uint8 ZDO_UseExtendedPANID[Z_EXTADDR_LEN];
pfnZdoCb zdoCBFunc[MAX_ZDO_CB_FUNC];
/*********************************************************************
* EXTERNAL VARIABLES
*/
/*********************************************************************
* EXTERNAL FUNCTIONS
*/
/*********************************************************************
* LOCAL FUNCTIONS
*/
void ZDApp_NetworkStartEvt( void );
void ZDApp_DeviceAuthEvt( void );
void ZDApp_SaveNetworkStateEvt( void );
uint8 ZDApp_ReadNetworkRestoreState( void );
uint8 ZDApp_RestoreNetworkState( void );
void ZDAppDetermineDeviceType( void );
void ZDApp_InitUserDesc( void );
void ZDAppCheckForHoldKey( void );
void ZDApp_ProcessOSALMsg( osal_event_hdr_t *msgPtr );
void ZDApp_ProcessNetworkJoin( void );
void ZDApp_SetCoordAddress( uint8 endPoint, uint8 dstEP );
uint8 ZDApp_RestoreNwkKey( void );
networkDesc_t* ZDApp_NwkDescListProcessing(void);
void ZDApp_SecInit( uint8 state );
UINT16 ZDApp_ProcessSecEvent( uint8 task_id, UINT16 events );
void ZDApp_ProcessSecMsg( osal_event_hdr_t *msgPtr );
void ZDApp_SendMsg( uint8 taskID, uint8 cmd, uint8 len, uint8 *buf );
void ZDApp_ResetTimerStart( uint16 delay );
void ZDApp_ResetTimerCancel( void );
void ZDApp_LeaveCtrlInit( void );
void ZDApp_LeaveCtrlSet( uint8 ra );
uint8 ZDApp_LeaveCtrlBypass( void );
void ZDApp_LeaveCtrlStartup( devStates_t* state, uint16* startDelay );
void ZDApp_LeaveUpdate( uint16 nwkAddr, uint8* extAddr,
uint8 removeChildren );
void ZDApp_NodeProfileSync( uint8 stackProfile );
void ZDApp_ProcessMsgCBs( zdoIncomingMsg_t *inMsg );
void ZDApp_RegisterCBs( void );
void ZDApp_InitZdoCBFunc(void);
/*********************************************************************
* LOCAL VARIABLES
*/
uint8 ZDAppTaskID;
uint8 nwkStatus = 1;//<2F><>ʼΪ<CABC><CEAA>1,Ĭ<><C4AC>Ϊ0,<2C><>0<EFBFBD>ֱ<EFBFBD>ʾ<EFBFBD>ɹ<EFBFBD>
endPointDesc_t *ZDApp_AutoFindMode_epDesc = (endPointDesc_t *)NULL;
uint8 ZDApp_LeaveCtrl;
#if defined( HOLD_AUTO_START )
devStates_t devState = DEV_HOLD;
#else
devStates_t devState = DEV_INIT;
#endif
#if ( ZG_BUILD_RTRONLY_TYPE ) || ( ZG_BUILD_ENDDEVICE_TYPE )
devStartModes_t devStartMode = MODE_JOIN; // Assume joining
//devStartModes_t devStartMode = MODE_RESUME; // if already "directly joined"
// to parent. Set to make the device do an Orphan scan.
#else
// Set the default to coodinator
devStartModes_t devStartMode = MODE_HARD;
#endif
uint8 retryCnt;
endPointDesc_t ZDApp_epDesc =
{
ZDO_EP,
&ZDAppTaskID,
(SimpleDescriptionFormat_t *)NULL, // No Simple description for ZDO
(afNetworkLatencyReq_t)0 // No Network Latency req
};
uint16 ZDApp_SavedPollRate = POLL_RATE;
/*********************************************************************
* @fn ZDApp_Init
*
* @brief ZDApp Initialization function.
*
* @param task_id - ZDApp Task ID
*
* @return None
*/
void ZDApp_Init( uint8 task_id )
{
// Save the task ID
ZDAppTaskID = task_id;
// Initialize the ZDO global device short address storage
ZDAppNwkAddr.addrMode = Addr16Bit;
ZDAppNwkAddr.addr.shortAddr = INVALID_NODE_ADDR;
(void)NLME_GetExtAddr(); // Load the saveExtAddr pointer.
// Check for manual "Hold Auto Start"
ZDAppCheckForHoldKey();
// Initialize ZDO items and setup the device - type of device to create.
ZDO_Init();
// Register the endpoint description with the AF
// This task doesn't have a Simple description, but we still need
// to register the endpoint.
afRegister( (endPointDesc_t *)&ZDApp_epDesc );
#if defined( ZDO_USERDESC_RESPONSE )
ZDApp_InitUserDesc();
#endif // ZDO_USERDESC_RESPONSE
// Start the device?
if ( devState != DEV_HOLD )
{
ZDOInitDevice( 0 );
}
else
{
ZDOInitDevice( ZDO_INIT_HOLD_NWK_START );
// Blink LED to indicate HOLD_START
HalLedBlink ( HAL_LED_4, 0, 50, 500 );
}
// Initialize the ZDO callback function pointers zdoCBFunc[]
ZDApp_InitZdoCBFunc();
ZDApp_RegisterCBs();
} /* ZDApp_Init() */
/*********************************************************************
* @fn ZDApp_SecInit
*
* @brief ZDApp initialize security.
*
* @param state - device initialization state
*
* @return none
*/
void ZDApp_SecInit( uint8 state )
{
uint8 zgPreConfigKey[SEC_KEY_LEN];
if ( ZG_SECURE_ENABLED && ZG_BUILD_COORDINATOR_TYPE && ZG_DEVICE_COORDINATOR_TYPE )
{
// Set the Trust Center bit
ZDO_Config_Node_Descriptor.ServerMask |= PRIM_TRUST_CENTER;
}
if ( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH )
{
ZDO_Config_Node_Descriptor.CapabilityFlags |= CAPINFO_SECURITY_CAPABLE;
}
// Initialize ZigBee Device Security Manager
ZDSecMgrInit(state);
if ( ZG_SECURE_ENABLED )
{
if ( state != ZDO_INITDEV_RESTORED_NETWORK_STATE )
{
nwkFrameCounter = 0;
if( _NIB.nwkKeyLoaded == FALSE )
{
if ( ( ZG_BUILD_COORDINATOR_TYPE && ZG_DEVICE_COORDINATOR_TYPE ) ||
( ( zgSecurityMode == ZG_SECURITY_RESIDENTIAL ) && zgPreConfigKeys ) )
{
ZDSecMgrReadKeyFromNv(ZCD_NV_PRECFGKEY, zgPreConfigKey);
SSP_UpdateNwkKey( zgPreConfigKey, 0);
SSP_SwitchNwkKey( 0 );
// clear local copy of key
osal_memset(zgPreConfigKey, 0x00, SEC_KEY_LEN);
}
}
}
}
}
/*********************************************************************
* @fn ZDApp_event_loop()
*
* @brief Main event loop for Zigbee device objects task. This function
* should be called at periodic intervals.
*
* @param task_id - Task ID
* @param events - Bitmap of events
*
* @return none
*/
UINT16 ZDApp_event_loop( uint8 task_id, UINT16 events )
{
uint8 *msg_ptr;
if ( events & SYS_EVENT_MSG )
{
while ( (msg_ptr = osal_msg_receive( ZDAppTaskID )) )
{
ZDApp_ProcessOSALMsg( (osal_event_hdr_t *)msg_ptr );
// Release the memory
osal_msg_deallocate( msg_ptr );
}
// Return unprocessed events
return (events ^ SYS_EVENT_MSG);
}
if ( events & ZDO_NETWORK_INIT )
{
// HalUARTWrite(0,"-network init -\n",16);
debug("<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʼ<EFBFBD><EFBFBD>\n");
// Initialize apps and start the network
devState = DEV_INIT;
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
ZDO_StartDevice( (uint8)ZDO_Config_Node_Descriptor.LogicalType, devStartMode,
DEFAULT_BEACON_ORDER, DEFAULT_SUPERFRAME_ORDER );
// Return unprocessed events
return (events ^ ZDO_NETWORK_INIT);
}
if ( ZSTACK_ROUTER_BUILD )
{
if ( events & ZDO_NETWORK_START )
{
ZDApp_NetworkStartEvt();
// Return unprocessed events
return (events ^ ZDO_NETWORK_START);
}
if ( events & ZDO_ROUTER_START )
{
if ( nwkStatus == ZSuccess )
{
if ( devState == DEV_END_DEVICE )
devState = DEV_ROUTER;
osal_pwrmgr_device( PWRMGR_ALWAYS_ON );
}
else
{
// remain as end device!!
}
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
// Return unprocessed events
return (events ^ ZDO_ROUTER_START);
}
}
if ( events & ZDO_STATE_CHANGE_EVT )
{
ZDO_UpdateNwkStatus( devState );
// At start up, do one MTO route discovery if the device is a concentrator
if ( zgConcentratorEnable == TRUE )
{
// Start next event
osal_start_timerEx( NWK_TaskID, NWK_MTO_RTG_REQ_EVT, 100 );
}
// Return unprocessed events
return (events ^ ZDO_STATE_CHANGE_EVT);
}
if ( events & ZDO_COMMAND_CNF )
{
// User defined logic
// Return unprocessed events
return (events ^ ZDO_COMMAND_CNF);
}
if ( events & ZDO_NWK_UPDATE_NV )
{
ZDApp_SaveNetworkStateEvt();
// Return unprocessed events
return (events ^ ZDO_NWK_UPDATE_NV);
}
if ( events & ZDO_DEVICE_RESET )
{
#ifdef ZBA_FALLBACK_NWKKEY
if ( devState == DEV_END_DEVICE_UNAUTH )
{
ZDSecMgrFallbackNwkKey();
}
else
#endif
{
// Set the NV startup option to force a "new" join.
zgWriteStartupOptions( ZG_STARTUP_SET, ZCD_STARTOPT_DEFAULT_NETWORK_STATE );
// The device has been in the UNAUTH state, so reset
// Note: there will be no return from this call
SystemResetSoft();
}
}
if ( ZG_SECURE_ENABLED )
{
return ( ZDApp_ProcessSecEvent( task_id, events ) );
}
else
{
// Discard or make more handlers
return 0;
}
}
/*********************************************************************
* @fn ZDApp_ProcessSecEvent()
*
* @brief Process incoming security events.
*
* @param task_id - Task ID
* @param events - Bitmap of events
*
* @return none
*/
UINT16 ZDApp_ProcessSecEvent( uint8 task_id, UINT16 events )
{
(void)task_id; // Intentionally unreferenced parameter
if ( ZSTACK_ROUTER_BUILD )
{
if ( events & ZDO_NEW_DEVICE )
{
// process the new device event
if ( ZDSecMgrNewDeviceEvent() == TRUE )
{
osal_start_timerEx( ZDAppTaskID, ZDO_NEW_DEVICE, 1000 );
}
// Return unprocessed events
return (events ^ ZDO_NEW_DEVICE);
}
}
if ( (ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH)
|| (ZG_CHECK_SECURITY_MODE == ZG_SECURITY_SE_STANDARD) )
{
if ( ZG_BUILD_COORDINATOR_TYPE && ZG_DEVICE_COORDINATOR_TYPE )
{
if ( events & ZDO_SECMGR_EVENT )
{
ZDSecMgrEvent();
// Return unprocessed events
return (events ^ ZDO_SECMGR_EVENT);
}
}
}
if ( events & ZDO_DEVICE_AUTH )
{
ZDApp_DeviceAuthEvt();
// Return unprocessed events
return (events ^ ZDO_DEVICE_AUTH);
}
if ( events & ZDO_FRAMECOUNTER_CHANGE )
{
if ( nwkFrameCounterChanges++ > MAX_NWK_FRAMECOUNTER_CHANGES )
{
ZDApp_SaveNwkKey();
}
// Return unprocessed events
return (events ^ ZDO_FRAMECOUNTER_CHANGE);
}
if ( events & ZDO_APS_FRAMECOUNTER_CHANGE )
{
#if defined (NV_RESTORE)
ZDSecMgrSaveApsLinkKey();
#endif // (NV_RESTORE)
// Return unprocessed events
return (events ^ ZDO_APS_FRAMECOUNTER_CHANGE);
}
if ( events & ZDO_TCLK_FRAMECOUNTER_CHANGE )
{
ZDSecMgrSaveTCLinkKey();
// Return unprocessed events
return (events ^ ZDO_TCLK_FRAMECOUNTER_CHANGE);
}
// Discard or make more handlers
return 0;
}
/*********************************************************************
* Application Functions
*/
/*********************************************************************
* @fn ZDOInitDevice
*
* @brief Start the device in the network. This function will read
* ZCD_NV_STARTUP_OPTION (NV item) to determine whether or not to
* restore the network state of the device.
*
* @param startDelay - timeDelay to start device (in milliseconds).
* There is a jitter added to this delay:
* ((NWK_START_DELAY + startDelay)
* + (osal_rand() & EXTENDED_JOINING_RANDOM_MASK))
* When startDelay is set to ZDO_INIT_HOLD_NWK_START
* this function will hold the network init. Application
* can start the device.
*
* NOTE: If the application would like to force a "new" join, the
* application should set the ZCD_STARTOPT_DEFAULT_NETWORK_STATE
* bit in the ZCD_NV_STARTUP_OPTION NV item before calling
* this function. "new" join means to not restore the network
* state of the device. Use zgWriteStartupOptions() to set these
* options.
*
* @return
* ZDO_INITDEV_RESTORED_NETWORK_STATE - The device's network state was
* restored.
* ZDO_INITDEV_NEW_NETWORK_STATE - The network state was initialized.
* This could mean that ZCD_NV_STARTUP_OPTION said to not restore, or
* it could mean that there was no network state to restore.
* ZDO_INITDEV_LEAVE_NOT_STARTED - Before the reset, a network leave was issued
* with the rejoin option set to TRUE. So, the device was not
* started in the network (one time only). The next time this
* function is called it will start.
*/
uint8 ZDOInitDevice( uint16 startDelay )
{
uint8 networkStateNV = ZDO_INITDEV_NEW_NETWORK_STATE;
uint16 extendedDelay = 0;
if ( devState == DEV_HOLD )
{
// Initialize the RAM items table, in case an NV item has been updated.
zgInitItems( FALSE );
}
ZDConfig_InitDescriptors();
//devtag.071807.todo - fix this temporary solution
_NIB.CapabilityFlags = ZDO_Config_Node_Descriptor.CapabilityFlags;
#if defined ( NV_RESTORE )
// Get Keypad directly to see if a reset nv is needed.
// Hold down the SW_BYPASS_NV key (defined in OnBoard.h)
// while booting to skip past NV Restore.
if ( HalKeyRead() == SW_BYPASS_NV )
networkStateNV = ZDO_INITDEV_NEW_NETWORK_STATE;
else
{
// Determine if NV should be restored
networkStateNV = ZDApp_ReadNetworkRestoreState();
}
if ( networkStateNV == ZDO_INITDEV_RESTORED_NETWORK_STATE )
{
networkStateNV = ZDApp_RestoreNetworkState();
}
else
{
// Wipe out the network state in NV
NLME_InitNV();
NLME_SetDefaultNV();
// clear NWK key values
ZDSecMgrClearNVKeyValues();
}
#endif
if ( networkStateNV == ZDO_INITDEV_NEW_NETWORK_STATE )
{
ZDAppDetermineDeviceType();
// Only delay if joining network - not restoring network state
extendedDelay = (uint16)((NWK_START_DELAY + startDelay)
+ (osal_rand() & EXTENDED_JOINING_RANDOM_MASK));
}
// Initialize the security for type of device
ZDApp_SecInit( networkStateNV );
if( ZDO_INIT_HOLD_NWK_START != startDelay )
{
devState = DEV_INIT; // Remove the Hold state
// Initialize leave control logic
ZDApp_LeaveCtrlInit();
// Check leave control reset settings
ZDApp_LeaveCtrlStartup( &devState, &startDelay );
// Leave may make the hold state come back
if ( devState == DEV_HOLD )
{
// Set the NV startup option to force a "new" join.
zgWriteStartupOptions( ZG_STARTUP_SET, ZCD_STARTOPT_DEFAULT_NETWORK_STATE );
// Notify the applications
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
return ( ZDO_INITDEV_LEAVE_NOT_STARTED ); // Don't join - (one time).
}
// Trigger the network start
ZDApp_NetworkInit( extendedDelay );
}
// set broadcast address mask to support broadcast filtering
NLME_SetBroadcastFilter( ZDO_Config_Node_Descriptor.CapabilityFlags );
return ( networkStateNV );
}
/*********************************************************************
* @fn ZDApp_ReadNetworkRestoreState
*
* @brief Read the ZCD_NV_STARTUP_OPTION NV Item to state whether
* or not to restore the network state.
* If the read value has the ZCD_STARTOPT_DEFAULT_NETWORK_STATE
* bit set return the ZDO_INITDEV_NEW_NETWORK_STATE.
*
* @param none
*
* @return ZDO_INITDEV_NEW_NETWORK_STATE
* or ZDO_INITDEV_RESTORED_NETWORK_STATE based on whether or
* not ZCD_STARTOPT_DEFAULT_NETWORK_STATE bit is set in
* ZCD_NV_STARTUP_OPTION
*/
uint8 ZDApp_ReadNetworkRestoreState( void )
{
uint8 networkStateNV = ZDO_INITDEV_RESTORED_NETWORK_STATE;
// Look for the New Network State option.
if ( zgReadStartupOptions() & ZCD_STARTOPT_DEFAULT_NETWORK_STATE )
{
networkStateNV = ZDO_INITDEV_NEW_NETWORK_STATE;
}
return ( networkStateNV );
}
/*********************************************************************
* @fn ZDAppDetermineDeviceType()
*
* @brief Determines the type of device to start.
*
* Looks at zgDeviceLogicalType and determines what type of
* device to start. The types are:
* ZG_DEVICETYPE_COORDINATOR
* ZG_DEVICETYPE_ROUTER
* ZG_DEVICETYPE_ENDDEVICE
*
* @param none
*
* @return none
*/
void ZDAppDetermineDeviceType( void )
{
if ( zgDeviceLogicalType == ZG_DEVICETYPE_COORDINATOR )
{
devStartMode = MODE_HARD; // Start as a coordinator
ZDO_Config_Node_Descriptor.LogicalType = NODETYPE_COORDINATOR;
}
else
{
if ( zgDeviceLogicalType == ZG_DEVICETYPE_ROUTER )
ZDO_Config_Node_Descriptor.LogicalType = NODETYPE_ROUTER;
else if ( zgDeviceLogicalType == ZG_DEVICETYPE_ENDDEVICE )
ZDO_Config_Node_Descriptor.LogicalType = NODETYPE_DEVICE;
// If AIB_apsUseExtendedPANID is set to a non-zero value by commissioning
// The device shall do rejoin the network. Otherwise, do normal join
if ( nwk_ExtPANIDValid( AIB_apsUseExtendedPANID ) == false )
{
devStartMode = MODE_JOIN; // Assume joining
}
else
{
devStartMode = MODE_REJOIN;
}
}
}
/*********************************************************************
* @fn ZDApp_NetworkStartEvt()
*
* @brief Process the Network Start Event
*
* @param none
*
* @return none
*/
void ZDApp_NetworkStartEvt( void )
{
if ( nwkStatus == ZSuccess )
{
// Successfully started a ZigBee network
if ( devState == DEV_COORD_STARTING )
{
devState = DEV_ZB_COORD;
}
osal_pwrmgr_device( PWRMGR_ALWAYS_ON );
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
}
else
{
// Try again with a higher energy threshold !!
if ( ( NLME_GetEnergyThreshold() + ENERGY_SCAN_INCREMENT ) < 0xff )
{
NLME_SetEnergyThreshold( (uint8)(NLME_GetEnergyThreshold() + ENERGY_SCAN_INCREMENT) );
osal_set_event( ZDAppTaskID, ZDO_NETWORK_INIT );
}
else
{
// Failed to start network. Enter a dormant state (until user intervenes)
devState = DEV_INIT;
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
}
}
}
/*********************************************************************
* @fn ZDApp_DeviceAuthEvt()
*
* @brief Process the Device Authentic Event
*
* @param none
*
* @return none
*/
void ZDApp_DeviceAuthEvt( void )
{
// received authentication from trust center
if ( devState == DEV_END_DEVICE_UNAUTH )
{
// Stop the reset timer so it doesn't reset
ZDApp_ResetTimerCancel();
devState = DEV_END_DEVICE;
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
// Set the Power Manager Device
#if defined ( POWER_SAVING )
osal_pwrmgr_device( PWRMGR_BATTERY );
#endif
if ( ZSTACK_ROUTER_BUILD )
{
if ( ZDO_Config_Node_Descriptor.LogicalType != NODETYPE_DEVICE )
{
// NOTE: first two parameters are not used, see NLMEDE.h for details
NLME_StartRouterRequest( 0, 0, false );
}
}
// Notify to save info into NV
ZDApp_NVUpdate();
// Save off the security
ZDApp_SaveNwkKey();
ZDApp_AnnounceNewAddress();
if ( (ZDO_Config_Node_Descriptor.CapabilityFlags & CAPINFO_RCVR_ON_IDLE) == 0 )
{
NLME_SetPollRate( ZDApp_SavedPollRate );
}
}
else
{
ZDApp_NVUpdate();
}
}
/*********************************************************************
* @fn ZDApp_SaveNetworkStateEvt()
*
* @brief Process the Save the Network State Event
*
* @param none
*
* @return none
*/
void ZDApp_SaveNetworkStateEvt( void )
{
#if defined ( NV_RESTORE )
#if defined ( NV_TURN_OFF_RADIO )
// Turn off the radio's receiver during an NV update
uint8 RxOnIdle;
uint8 x = false;
ZMacGetReq( ZMacRxOnIdle, &RxOnIdle );
ZMacSetReq( ZMacRxOnIdle, &x );
#endif
// Update the Network State in NV
NLME_UpdateNV( NWK_NV_NIB_ENABLE |
NWK_NV_DEVICELIST_ENABLE |
NWK_NV_BINDING_ENABLE |
NWK_NV_ADDRMGR_ENABLE );
// Reset the NV startup option to resume from NV by
// clearing the "New" join option.
zgWriteStartupOptions( FALSE, ZCD_STARTOPT_DEFAULT_NETWORK_STATE );
#if defined ( NV_TURN_OFF_RADIO )
ZMacSetReq( ZMacRxOnIdle, &RxOnIdle );
#endif
#endif // NV_RESTORE
}
/*********************************************************************
* @fn ZDApp_RestoreNetworkState()
*
* @brief This function will restore the network state of the
* device if the network state is stored in NV.
*
* @param none
*
* @return
* ZDO_INITDEV_RESTORED_NETWORK_STATE - The device's network state was
* restored.
* ZDO_INITDEV_NEW_NETWORK_STATE - The network state was not used.
* This could mean that zgStartupOption said to not restore, or
* it could mean that there was no network state to restore.
*
*/
uint8 ZDApp_RestoreNetworkState( void )
{
uint8 nvStat;
// Initialize NWK NV items
nvStat = NLME_InitNV();
if ( nvStat != NV_OPER_FAILED )
{
if ( NLME_RestoreFromNV() )
{
// Are we a coordinator
ZDAppNwkAddr.addr.shortAddr = NLME_GetShortAddr();
if ( ZDAppNwkAddr.addr.shortAddr == 0 )
ZDO_Config_Node_Descriptor.LogicalType = NODETYPE_COORDINATOR;
devStartMode = MODE_RESUME;
osal_cpyExtAddr( ZDO_UseExtendedPANID, _NIB.extendedPANID );
}
else
nvStat = NV_ITEM_UNINIT;
if ( ZG_SECURE_ENABLED )
{
nwkFrameCounterChanges = 0;
if ( ZG_BUILD_COORDINATOR_TYPE && ZG_DEVICE_COORDINATOR_TYPE )
{
ZDApp_RestoreNwkKey();
}
}
// The default for RxOnWhenIdle is true for Routers and false for end devices
// [setup in the NLME_RestoreFromNV()]. Change it here if you want something
// other than default.
}
if ( nvStat == ZSUCCESS )
return ( ZDO_INITDEV_RESTORED_NETWORK_STATE );
else
return ( ZDO_INITDEV_NEW_NETWORK_STATE );
}
/*********************************************************************
* @fn ZDApp_InitUserDesc()
*
* @brief Initialize the User Descriptor, the descriptor is read from NV
* when needed. If you want to initialize the User descriptor to
* something other than all zero, do it here.
*
* @param none
*
* @return none
*/
void ZDApp_InitUserDesc( void )
{
UserDescriptorFormat_t ZDO_DefaultUserDescriptor;
// Initialize the User Descriptor, the descriptor is read from NV
// when needed. If you want to initialize the User descriptor to something
// other than all zero, do it here.
osal_memset( &ZDO_DefaultUserDescriptor, 0, sizeof( UserDescriptorFormat_t ) );
if ( ZSUCCESS == osal_nv_item_init( ZCD_NV_USERDESC,
sizeof(UserDescriptorFormat_t), (void*)&ZDO_DefaultUserDescriptor ) )
{
if ( ZSUCCESS == osal_nv_read( ZCD_NV_USERDESC, 0,
sizeof(UserDescriptorFormat_t), (void*)&ZDO_DefaultUserDescriptor ) )
{
if ( ZDO_DefaultUserDescriptor.len != 0 )
{
ZDO_Config_Node_Descriptor.UserDescAvail = TRUE;
}
}
}
}
/*********************************************************************
* @fn ZDAppCheckForHoldKey()
*
* @brief Check for key to set the device into Hold Auto Start
*
* @param none
*
* @return none
*/
void ZDAppCheckForHoldKey( void )
{
#if (defined HAL_KEY) && (HAL_KEY == TRUE)
// Get Keypad directly to see if a HOLD_START is needed.
// Hold down the SW_BYPASS_START key (see OnBoard.h)
// while booting to avoid starting up the device.
if ( HalKeyRead () == SW_BYPASS_START)
{
// Change the device state to HOLD on start up
devState = DEV_HOLD;
}
#endif // HAL_KEY
}
/*********************************************************************
* @fn ZDApp_ProcessOSALMsg()
*
* @brief Process the incoming task message.
*
* @param msgPtr - message to process
*
* @return none
*/
void ZDApp_ProcessOSALMsg( osal_event_hdr_t *msgPtr )
{
// Data Confirmation message fields
uint8 sentEP; // This should always be 0
uint8 sentStatus;
afDataConfirm_t *afDataConfirm;
uint8 tmp;
switch ( msgPtr->event )
{
// Incoming ZDO Message
case AF_INCOMING_MSG_CMD:
ZDP_IncomingData( (afIncomingMSGPacket_t *)msgPtr );
break;
case ZDO_CB_MSG:
ZDApp_ProcessMsgCBs( (zdoIncomingMsg_t *)msgPtr );
break;
case AF_DATA_CONFIRM_CMD:
// This message is received as a confirmation of a data packet sent.
// The status is of ZStatus_t type [defined in NLMEDE.h]
// The message fields are defined in AF.h
afDataConfirm = (afDataConfirm_t *)msgPtr;
sentEP = afDataConfirm->endpoint;
sentStatus = afDataConfirm->hdr.status;
// Action taken when confirmation is received.
#if defined ( ZIGBEE_FREQ_AGILITY )
if ( pZDNwkMgr_ProcessDataConfirm )
pZDNwkMgr_ProcessDataConfirm( afDataConfirm );
#endif
(void)sentEP;
(void)sentStatus;
break;
case ZDO_NWK_DISC_CNF:
if (devState != DEV_NWK_DISC)
break;
if ( ZG_BUILD_JOINING_TYPE && ZG_DEVICE_JOINING_TYPE )
{
// Process the network discovery scan results and choose a parent
// device to join/rejoin itself
networkDesc_t *pChosenNwk;
if ( ( (pChosenNwk = ZDApp_NwkDescListProcessing()) != NULL ) && (zdoDiscCounter > NUM_DISC_ATTEMPTS) )
{
if ( devStartMode == MODE_JOIN )
{
devState = DEV_NWK_JOINING;
ZDApp_NodeProfileSync( pChosenNwk->stackProfile);
if ( NLME_JoinRequest( pChosenNwk->extendedPANID, pChosenNwk->panId,
pChosenNwk->logicalChannel,
ZDO_Config_Node_Descriptor.CapabilityFlags,
pChosenNwk->chosenRouter, pChosenNwk->chosenRouterDepth ) != ZSuccess )
{
ZDApp_NetworkInit( (uint16)(NWK_START_DELAY
+ ((uint16)(osal_rand()& EXTENDED_JOINING_RANDOM_MASK))) );
}
} // if ( devStartMode == MODE_JOIN )
else if ( devStartMode == MODE_REJOIN )
{
devState = DEV_NWK_REJOIN;
// Before trying to do rejoin, check if the device has a valid short address
// If not, generate a random short address for itself
if ( _NIB.nwkDevAddress == INVALID_NODE_ADDR )
{
_NIB.nwkDevAddress = osal_rand();
ZMacSetReq( ZMacShortAddress, (byte*)&_NIB.nwkDevAddress );
}
if ( ZG_SECURE_ENABLED )
{
ZDApp_RestoreNwkKey();
}
// Check if the device has a valid PanID, if not, set it to the discovered Pan
if ( _NIB.nwkPanId == INVALID_PAN_ID )
{
_NIB.nwkPanId = pChosenNwk->panId;
ZMacSetReq( ZMacPanId, (byte*)&(_NIB.nwkPanId) );
}
tmp = true;
ZMacSetReq( ZMacRxOnIdle, &tmp ); // Set receiver always on during rejoin
HalUARTWrite(0,"-rejoin net-\n",13);
if ( NLME_ReJoinRequest( ZDO_UseExtendedPANID, pChosenNwk->logicalChannel) != ZSuccess )
{
ZDApp_NetworkInit( (uint16)(NWK_START_DELAY
+ ((uint16)(osal_rand()& EXTENDED_JOINING_RANDOM_MASK))) );
}
} // else if ( devStartMode == MODE_REJOIN )
if ( ZDO_Config_Node_Descriptor.CapabilityFlags & CAPINFO_RCVR_ON_IDLE )
{
// The receiver is on, turn network layer polling off.
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
else
{
if ( (ZG_SECURE_ENABLED) && (devStartMode == MODE_JOIN) )
{
ZDApp_SavedPollRate = zgPollRate;
NLME_SetPollRate( zgRejoinPollRate );
}
}
}
else
{
if ( continueJoining )
{
#if defined ( MANAGED_SCAN )
ZDApp_NetworkInit( MANAGEDSCAN_DELAY_BETWEEN_SCANS );
#else
zdoDiscCounter++;
ZDApp_NetworkInit( (uint16)(BEACON_REQUEST_DELAY
+ ((uint16)(osal_rand()& BEACON_REQ_DELAY_MASK))) );
#endif
}
}
}
break;
case ZDO_NWK_JOIN_IND:
if ( ZG_BUILD_JOINING_TYPE && ZG_DEVICE_JOINING_TYPE )
{
ZDApp_ProcessNetworkJoin();
}
break;
case ZDO_NWK_JOIN_REQ:
if ( ZG_BUILD_JOINING_TYPE && ZG_DEVICE_JOINING_TYPE )
{
retryCnt = 0;
devStartMode = MODE_RESUME;
_tmpRejoinState = true;
osal_cpyExtAddr( ZDO_UseExtendedPANID, _NIB.extendedPANID );
zgDefaultStartingScanDuration = BEACON_ORDER_60_MSEC;
ZDApp_NetworkInit( 0 );
}
break;
default:
if ( ZG_SECURE_ENABLED )
ZDApp_ProcessSecMsg( msgPtr );
break;
}
}
/*********************************************************************
* @fn ZDApp_ProcessMsgCBs()
*
* @brief Process response messages
*
* @param none
*
* @return none
*/
void ZDApp_ProcessMsgCBs( zdoIncomingMsg_t *inMsg )
{
switch ( inMsg->clusterID )
{
#if defined ( ZDO_NWKADDR_REQUEST ) || defined ( ZDO_IEEEADDR_REQUEST ) || defined ( REFLECTOR )
case NWK_addr_rsp:
case IEEE_addr_rsp:
{
ZDO_NwkIEEEAddrResp_t *pAddrRsp;
pAddrRsp = ZDO_ParseAddrRsp( inMsg );
if ( pAddrRsp )
{
if ( pAddrRsp->status == ZSuccess )
{
ZDO_UpdateAddrManager( pAddrRsp->nwkAddr, pAddrRsp->extAddr );
}
osal_mem_free( pAddrRsp );
}
}
break;
#endif
#if defined ( REFLECTOR )
case Bind_req:
case Unbind_req:
{
ZDO_BindUnbindReq_t bindReq;
ZDO_ParseBindUnbindReq( inMsg, &bindReq );
ZDO_ProcessBindUnbindReq( inMsg, &bindReq );
}
break;
#endif
#if ( ZG_BUILD_COORDINATOR_TYPE )
case Bind_rsp:
case Unbind_rsp:
if (ZG_DEVICE_COORDINATOR_TYPE && matchED)
{
ZDMatchSendState(
(uint8)((inMsg->clusterID == Bind_rsp) ? ZDMATCH_REASON_BIND_RSP : ZDMATCH_REASON_UNBIND_RSP),
ZDO_ParseBindRsp(inMsg), inMsg->TransSeq );
}
break;
case End_Device_Bind_req:
if (ZG_DEVICE_COORDINATOR_TYPE)
{
ZDEndDeviceBind_t bindReq;
ZDO_ParseEndDeviceBindReq( inMsg, &bindReq );
ZDO_MatchEndDeviceBind( &bindReq );
// Freeing the cluster lists - if allocated.
if ( bindReq.numInClusters )
osal_mem_free( bindReq.inClusters );
if ( bindReq.numOutClusters )
osal_mem_free( bindReq.outClusters );
}
break;
#endif
}
}
/*********************************************************************
* @fn ZDApp_RegisterCBs()
*
* @brief Process response messages
*
* @param none
*
* @return none
*/
void ZDApp_RegisterCBs( void )
{
#if defined ( ZDO_IEEEADDR_REQUEST ) || defined ( REFLECTOR )
ZDO_RegisterForZDOMsg( ZDAppTaskID, IEEE_addr_rsp );
#endif
#if defined ( ZDO_NWKADDR_REQUEST ) || defined ( REFLECTOR )
ZDO_RegisterForZDOMsg( ZDAppTaskID, NWK_addr_rsp );
#endif
#if ZG_BUILD_COORDINATOR_TYPE
ZDO_RegisterForZDOMsg( ZDAppTaskID, Bind_rsp );
ZDO_RegisterForZDOMsg( ZDAppTaskID, Unbind_rsp );
ZDO_RegisterForZDOMsg( ZDAppTaskID, End_Device_Bind_req );
#endif
#if defined ( REFLECTOR )
ZDO_RegisterForZDOMsg( ZDAppTaskID, Bind_req );
ZDO_RegisterForZDOMsg( ZDAppTaskID, Unbind_req );
#endif
}
/*********************************************************************
* @fn ZDApp_ProcessSecMsg()
*
* @brief Process the incoming security message.
*
* @param msgPtr - message to process
*
* @return none
*/
void ZDApp_ProcessSecMsg( osal_event_hdr_t *msgPtr )
{
switch ( msgPtr->event )
{
case ZDO_ESTABLISH_KEY_CFM:
if ( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH )
{
ZDSecMgrEstablishKeyCfm( (ZDO_EstablishKeyCfm_t*)msgPtr );
}
break;
case ZDO_ESTABLISH_KEY_IND:
if ( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH )
{
if ( ZG_BUILD_JOINING_TYPE && ZG_DEVICE_JOINING_TYPE )
{
ZDSecMgrEstablishKeyInd( (ZDO_EstablishKeyInd_t*)msgPtr );
}
}
break;
case ZDO_TRANSPORT_KEY_IND:
if ( ZG_BUILD_JOINING_TYPE && ZG_DEVICE_JOINING_TYPE )
{
ZDSecMgrTransportKeyInd( (ZDO_TransportKeyInd_t*)msgPtr );
}
break;
case ZDO_UPDATE_DEVICE_IND:
if ( ZG_BUILD_COORDINATOR_TYPE && ZG_DEVICE_COORDINATOR_TYPE )
{
ZDSecMgrUpdateDeviceInd( (ZDO_UpdateDeviceInd_t*)msgPtr );
}
break;
case ZDO_REMOVE_DEVICE_IND:
if ( ZG_BUILD_RTRONLY_TYPE && ( zgDeviceLogicalType == ZG_DEVICETYPE_ROUTER ) )
{
ZDSecMgrRemoveDeviceInd( (ZDO_RemoveDeviceInd_t*)msgPtr );
}
break;
case ZDO_REQUEST_KEY_IND:
if (( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH ) ||
( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_SE_STANDARD ))
{
if ( ZG_BUILD_COORDINATOR_TYPE && ZG_DEVICE_COORDINATOR_TYPE )
{
ZDSecMgrRequestKeyInd( (ZDO_RequestKeyInd_t*)msgPtr );
}
}
break;
case ZDO_SWITCH_KEY_IND:
if ( ZG_BUILD_JOINING_TYPE && ZG_DEVICE_JOINING_TYPE )
{
ZDSecMgrSwitchKeyInd( (ZDO_SwitchKeyInd_t*)msgPtr );
}
break;
case ZDO_AUTHENTICATE_IND:
if ( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH )
{
ZDSecMgrAuthenticateInd( (ZDO_AuthenticateInd_t*)msgPtr );
}
break;
case ZDO_AUTHENTICATE_CFM:
if ( ZG_CHECK_SECURITY_MODE == ZG_SECURITY_PRO_HIGH )
{
ZDSecMgrAuthenticateCfm( (ZDO_AuthenticateCfm_t*)msgPtr );
}
break;
default:
// Unsupported messages
break;
}
}
/*********************************************************************
* @fn ZDApp_ProcessNetworkJoin()
*
* @brief
*
* Save off the Network key information.
*
* @param none
*
* @return none
*/
void ZDApp_ProcessNetworkJoin( void )
{
if ( (devState == DEV_NWK_JOINING) ||
((devState == DEV_NWK_ORPHAN) &&
(ZDO_Config_Node_Descriptor.LogicalType == NODETYPE_ROUTER)) )
{
// Result of a Join attempt by this device.
if ( nwkStatus == ZSuccess )
{
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
#if defined ( POWER_SAVING )
osal_pwrmgr_device( PWRMGR_BATTERY );
#endif
if ( ZG_SECURE_ENABLED && ( ZDApp_RestoreNwkKey() == false ) )
{
// wait for auth from trust center!!
devState = DEV_END_DEVICE_UNAUTH;
// Start the reset timer for MAX UNAUTH time
ZDApp_ResetTimerStart( 10000 );//MAX_DEVICE_UNAUTH_TIMEOUT );
}
else
{
if ( ZSTACK_ROUTER_BUILD )
{
if ( devState == DEV_NWK_ORPHAN
&& ZDO_Config_Node_Descriptor.LogicalType != NODETYPE_DEVICE )
{
// Change NIB state to router for restore
_NIB.nwkState = NWK_ROUTER;
}
}
if ( devState == DEV_NWK_JOINING )
{
ZDApp_AnnounceNewAddress();
}
devState = DEV_END_DEVICE;
if ( ZSTACK_ROUTER_BUILD )
{
// NOTE: first two parameters are not used, see NLMEDE.h for details
if ( ZDO_Config_Node_Descriptor.LogicalType != NODETYPE_DEVICE )
{
NLME_StartRouterRequest( 0, 0, false );
}
}
}
}
else
{
if ( (devStartMode == MODE_RESUME) && (++retryCnt >= MAX_RESUME_RETRY) )
{
if ( _NIB.nwkPanId == 0xFFFF || _NIB.nwkPanId == INVALID_PAN_ID )
devStartMode = MODE_JOIN;
else
{
devStartMode = MODE_REJOIN;
_tmpRejoinState = true;
}
}
if ( (NLME_GetShortAddr() != INVALID_NODE_ADDR) ||
(_NIB.nwkDevAddress != INVALID_NODE_ADDR) )
{
uint16 addr = INVALID_NODE_ADDR;
// Invalidate nwk addr so end device does not use in its data reqs.
_NIB.nwkDevAddress = INVALID_NODE_ADDR;
ZMacSetReq( ZMacShortAddress, (uint8 *)&addr );
}
// Clear the neighbor Table and network discovery tables.
nwkNeighborInitTable();
NLME_NwkDiscTerm();
zdoDiscCounter = 1;
// ZDApp_NetworkInit( (uint16)
// ((NWK_START_DELAY * (osal_rand() & 0x0F)) +
// (NWK_START_DELAY * 5)) );
ZDApp_NetworkInit( (uint16)(NWK_START_DELAY
+ ((uint16)(osal_rand()& EXTENDED_JOINING_RANDOM_MASK))) );
}
}
else if ( devState == DEV_NWK_ORPHAN || devState == DEV_NWK_REJOIN )
{
// results of an orphaning attempt by this device
if (nwkStatus == ZSuccess)
{
if ( ZG_SECURE_ENABLED )
{
ZDApp_RestoreNwkKey();
}
devState = DEV_END_DEVICE;
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
// setup Power Manager Device
#if defined ( POWER_SAVING )
osal_pwrmgr_device( PWRMGR_BATTERY );
#endif
if ( ZDO_Config_Node_Descriptor.CapabilityFlags & CAPINFO_RCVR_ON_IDLE )
{
// The receiver is on, turn network layer polling off.
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
if ( ZSTACK_ROUTER_BUILD )
{
// NOTE: first two parameters are not used, see NLMEDE.h for details
if ( ZDO_Config_Node_Descriptor.LogicalType != NODETYPE_DEVICE )
{
NLME_StartRouterRequest( 0, 0, false );
}
}
ZDApp_AnnounceNewAddress();
}
else
{
if ( devStartMode == MODE_RESUME )
{
if ( ++retryCnt <= MAX_RESUME_RETRY )
{
if ( _NIB.nwkPanId == 0xFFFF || _NIB.nwkPanId == INVALID_PAN_ID )
devStartMode = MODE_JOIN;
else
{
devStartMode = MODE_REJOIN;
_tmpRejoinState = true;
}
}
// Do a normal join to the network after certain times of rejoin retries
else if( AIB_apsUseInsecureJoin == true )
{
devStartMode = MODE_JOIN;
}
}
// Clear the neighbor Table and network discovery tables.
nwkNeighborInitTable();
NLME_NwkDiscTerm();
// setup a retry for later...
ZDApp_NetworkInit( (uint16)(NWK_START_DELAY
+ (osal_rand()& EXTENDED_JOINING_RANDOM_MASK)) );
}
}
#if defined ( ZIGBEE_STOCHASTIC_ADDRESSING )
else
{
// Assume from address conflict
if ( _NIB.nwkAddrAlloc == NWK_ADDRESSING_STOCHASTIC )
{
// Notify the network
ZDApp_AnnounceNewAddress();
// Notify apps
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
}
}
#endif
}
/*********************************************************************
* @fn ZDApp_SaveNwkKey()
*
* @brief Save off the Network key information.
*
* @param none
*
* @return none
*/
void ZDApp_SaveNwkKey( void )
{
nwkActiveKeyItems keyItems;
SSP_ReadNwkActiveKey( &keyItems );
keyItems.frameCounter++;
osal_nv_write( ZCD_NV_NWKKEY, 0, sizeof( nwkActiveKeyItems ),
(void *)&keyItems );
nwkFrameCounterChanges = 0;
// Clear copy in RAM before return.
osal_memset( &keyItems, 0x00, sizeof(keyItems) );
}
/*********************************************************************
* @fn ZDApp_ResetNwkKey()
*
* @brief Reset the Network key information in NV.
*
* @param none
*
* @return none
*/
void ZDApp_ResetNwkKey( void )
{
nwkActiveKeyItems keyItems;
osal_memset( &keyItems, 0, sizeof( nwkActiveKeyItems ) );
osal_nv_write( ZCD_NV_NWKKEY, 0, sizeof( nwkActiveKeyItems ),
(void *)&keyItems );
}
/*********************************************************************
* @fn ZDApp_RestoreNwkKey()
*
* @brief
*
* Save off the Network key information.
*
* @param none
*
* @return true if restored from NV, false if not
*/
uint8 ZDApp_RestoreNwkKey( void )
{
nwkActiveKeyItems keyItems;
uint8 ret = false;
if ( osal_nv_read( ZCD_NV_NWKKEY, 0, sizeof(nwkActiveKeyItems), (void*)&keyItems )
== ZSUCCESS )
{
if ( keyItems.frameCounter > 0 )
{
// Restore the key information
keyItems.frameCounter += MAX_NWK_FRAMECOUNTER_CHANGES;
nwkFrameCounter = keyItems.frameCounter;
ret = true;
}
// Force a save for the first frame counter increment
nwkFrameCounterChanges = MAX_NWK_FRAMECOUNTER_CHANGES + 1;
}
// Clear copy in RAM before return.
osal_memset( &keyItems, 0x00, sizeof(keyItems) );
return ( ret );
}
/*********************************************************************
* @fn ZDApp_ResetTimerStart
*
* @brief Start the reset timer.
*
* @param delay - delay time(ms) before reset
*
* @return none
*/
void ZDApp_ResetTimerStart( uint16 delay )
{
// Start the rest timer
osal_start_timerEx( ZDAppTaskID, ZDO_DEVICE_RESET, delay );
}
/*********************************************************************
* @fn ZDApp_ResetTimerCancel
*
* @brief Cancel the reset timer.
*
* @param none
*
* @return none
*/
void ZDApp_ResetTimerCancel( void )
{
// Cancel the reset timer
osal_stop_timerEx( ZDAppTaskID, ZDO_DEVICE_RESET );
}
/*********************************************************************
* @fn ZDApp_LeaveCtrlInit
*
* @brief Initialize the leave control logic.
*
* @param none
*
* @return none
*/
void ZDApp_LeaveCtrlInit( void )
{
uint8 status;
// Initialize control state
ZDApp_LeaveCtrl = ZDAPP_LEAVE_CTRL_INIT;
status = osal_nv_item_init( ZCD_NV_LEAVE_CTRL,
sizeof(ZDApp_LeaveCtrl),
&ZDApp_LeaveCtrl );
if ( status == ZSUCCESS )
{
// Read saved control
osal_nv_read( ZCD_NV_LEAVE_CTRL,
0,
sizeof( uint8 ),
&ZDApp_LeaveCtrl);
}
}
/*********************************************************************
* @fn ZDApp_LeaveCtrlSet
*
* @brief Set the leave control logic.
*
* @param ra - reassociate flag
*
* @return none
*/
void ZDApp_LeaveCtrlSet( uint8 ra )
{
ZDApp_LeaveCtrl = ZDAPP_LEAVE_CTRL_SET;
if ( ra == TRUE )
{
ZDApp_LeaveCtrl |= ZDAPP_LEAVE_CTRL_RA;
}
// Write the leave control
osal_nv_write( ZCD_NV_LEAVE_CTRL,
0,
sizeof( uint8 ),
&ZDApp_LeaveCtrl);
}
/*********************************************************************
* @fn ZDApp_LeaveCtrlReset
*
* @brief Re-initialize the leave control logic.
*
* @param none
*
* @return none
*/
void ZDApp_LeaveCtrlReset( void )
{
// Set leave control to initialized state
ZDApp_LeaveCtrl = ZDAPP_LEAVE_CTRL_INIT;
// Write initialized control
osal_nv_write( ZCD_NV_LEAVE_CTRL,
0,
sizeof( uint8 ),
&ZDApp_LeaveCtrl);
}
/*********************************************************************
* @fn ZDApp_LeaveCtrlBypass
*
* @brief Check if NV restore should be skipped during a leave reset.
*
* @param none
*
* @return uint8 - (TRUE bypass:FALSE do not bypass)
*/
uint8 ZDApp_LeaveCtrlBypass( void )
{
uint8 bypass;
if ( ZDApp_LeaveCtrl & ZDAPP_LEAVE_CTRL_SET )
{
bypass = TRUE;
}
else
{
bypass = FALSE;
}
return bypass;
}
/*********************************************************************
* @fn ZDApp_LeaveCtrlStartup
*
* @brief Check for startup conditions during a leave reset.
*
* @param state - devState_t determined by leave control logic
* @param startDelay - startup delay
*
* @return none
*/
void ZDApp_LeaveCtrlStartup( devStates_t* state, uint16* startDelay )
{
*startDelay = 0;
if ( ZDApp_LeaveCtrl & ZDAPP_LEAVE_CTRL_SET )
{
if ( ZDApp_LeaveCtrl & ZDAPP_LEAVE_CTRL_RA )
{
*startDelay = LEAVE_RESET_DELAY;
}
else
{
*state = DEV_HOLD;
}
// Reset leave control logic
ZDApp_LeaveCtrlReset();
}
}
/*********************************************************************
* @fn ZDApp_LeaveReset
*
* @brief Setup a device reset due to a leave indication/confirm.
*
* @param ra - reassociate flag
*
* @return none
*/
void ZDApp_LeaveReset( uint8 ra )
{
ZDApp_LeaveCtrlSet( ra );
ZDApp_ResetTimerStart( LEAVE_RESET_DELAY );
}
/*********************************************************************
* @fn ZDApp_LeaveUpdate
*
* @brief Update local device data related to leaving device.
*
* @param nwkAddr - NWK address of leaving device
* @param extAddr - EXT address of leaving device
* @param removeChildren - remove children of leaving device
*
* @return none
*/
void ZDApp_LeaveUpdate( uint16 nwkAddr, uint8* extAddr,
uint8 removeChildren )
{
// Remove Apps Key for leaving device
ZDSecMgrDeviceRemoveByExtAddr(extAddr);
// Clear SECURITY bit from Address Manager
ZDSecMgrAddrClear( extAddr );
if ( pbindRemoveDev )
{
zAddrType_t devAddr;
// Remove bind entry and all related data
devAddr.addrMode = Addr64Bit;
osal_memcpy(devAddr.addr.extAddr, extAddr, Z_EXTADDR_LEN);
pbindRemoveDev(&devAddr);
}
// Remove if child
if ( ZSTACK_ROUTER_BUILD )
{
NLME_RemoveChild( extAddr, removeChildren );
}
// Remove Routing table related entry
RTG_RemoveRtgEntry( nwkAddr, 0 );
// Remove entry from neighborTable
nwkNeighborRemove( nwkAddr, _NIB.nwkPanId );
// Schedule to save data to NV
ZDApp_NwkWriteNVRequest();
}
/*********************************************************************
* @fn ZDApp_NetworkDiscoveryReq
*
* @brief Request a network discovery.
*
* @param scanChannels -
* @param scanDuration -
*
* @return ZStatus_t
*/
ZStatus_t ZDApp_NetworkDiscoveryReq( uint32 scanChannels, uint8 scanDuration)
{
// Setup optional filters - tbd
// Request NLME network discovery
return NLME_NetworkDiscoveryRequest(scanChannels, scanDuration);
}
/*********************************************************************
* @fn ZDApp_JoinReq
*
* @brief Request the device to join a parent in a network.
*
* @param channel -
* @param panID -
*
* @return ZStatus_t
*/
ZStatus_t ZDApp_JoinReq( uint8 channel, uint16 panID, uint8 *extendedPanID,
uint16 chosenParent, uint8 parentDepth, uint8 stackProfile )
{
// Sync up the node with the stack profile (In the case where a pro device
// joins a non-pro network, or verse versa)
ZDApp_NodeProfileSync( stackProfile);
// Request NLME Join Request
return NLME_JoinRequest(extendedPanID, panID,channel,
ZDO_Config_Node_Descriptor.CapabilityFlags,
chosenParent, parentDepth);
}
/*********************************************************************
* @fn ZDApp_DeviceConfigured
*
* @brief Check to see if the local device is configured (i.e., part
* of a network).
*
* @param none
*
* @return TRUE if configured. FALSE, otherwise.
*/
uint8 ZDApp_DeviceConfigured( void )
{
uint16 nwkAddr = INVALID_NODE_ADDR;
osal_nv_read( ZCD_NV_NIB, osal_offsetof( nwkIB_t, nwkDevAddress ),
sizeof( uint16), &nwkAddr );
// Does the NIB have anything more than default?
return ( nwkAddr == INVALID_NODE_ADDR ? FALSE : TRUE );
}
/*********************************************************************
* CALLBACK FUNCTIONS
*/
/*********************************************************************
* @fn ZDApp_SendEventMsg()
*
* @brief
*
* Sends a Network Join message
*
* @param cmd - command ID
* @param len - length (in bytes) of the buf field
* @param buf - buffer for the rest of the message.
*
* @return none
*/
void ZDApp_SendEventMsg( uint8 cmd, uint8 len, uint8 *buf )
{
ZDApp_SendMsg( ZDAppTaskID, cmd, len, buf );
}
/*********************************************************************
* @fn ZDApp_SendMsg()
*
* @brief Sends a OSAL message
*
* @param taskID - Where to send the message
* @param cmd - command ID
* @param len - length (in bytes) of the buf field
* @param buf - buffer for the rest of the message.
*
* @return none
*/
void ZDApp_SendMsg( uint8 taskID, uint8 cmd, uint8 len, uint8 *buf )
{
osal_event_hdr_t *msgPtr;
// Send the address to the task
msgPtr = (osal_event_hdr_t *)osal_msg_allocate( len );
if ( msgPtr )
{
if ( (len > 0) && (buf != NULL) )
osal_memcpy( msgPtr, buf, len );
msgPtr->event = cmd;
osal_msg_send( taskID, (uint8 *)msgPtr );
}
}
/*********************************************************************
* Call Back Functions from NWK - API
*/
/*********************************************************************
* @fn ZDO_NetworkDiscoveryConfirmCB
*
* @brief This function returns a choice of PAN to join.
*
* @param status - return status of the nwk discovery confirm
*
* @return ZStatus_t
*/
ZStatus_t ZDO_NetworkDiscoveryConfirmCB(uint8 status)
{
osal_event_hdr_t msg;
// If Scan is initiated by ZDO_MGMT_NWK_DISC_REQ
// Send ZDO_MGMT_NWK_DISC_RSP back
#if defined ( ZDO_MGMT_NWKDISC_RESPONSE )
if ( zdappMgmtNwkDiscReqInProgress )
{
zdappMgmtNwkDiscReqInProgress = false;
ZDO_FinishProcessingMgmtNwkDiscReq();
}
else
#endif
{
// Pass the confirm to another task if it registers the callback
// Otherwise, pass the confirm to ZDApp.
if (zdoCBFunc[ZDO_NWK_DISCOVERY_CNF_CBID] != NULL )
{
zdoCBFunc[ZDO_NWK_DISCOVERY_CNF_CBID]( (void*)&status );
}
else
{
// Otherwise, send scan confirm to ZDApp task to proceed
msg.status = ZDO_SUCCESS;
ZDApp_SendMsg( ZDAppTaskID, ZDO_NWK_DISC_CNF, sizeof(osal_event_hdr_t), (uint8 *)&msg );
}
}
return (ZSuccess);
} // ZDO_NetworkDiscoveryConfirmCB
/*********************************************************************
* @fn ZDApp_NwkDescListProcessing
*
* @brief This function process the network discovery result and select
* a parent device to join itself.
*
* @param none
*
* @return ZStatus_t
*/
#define STACK_PROFILE_MAX 2
networkDesc_t* ZDApp_NwkDescListProcessing(void)
{
networkDesc_t *pNwkDesc;
uint8 i, ResultCount = 0;
uint8 stackProfile;
uint8 stackProfilePro;
uint8 selected;
// Count the number of nwk descriptors in the list
pNwkDesc = nwk_getNwkDescList();
while (pNwkDesc)
{
ResultCount++;
pNwkDesc = pNwkDesc->nextDesc;
}
// process discovery results
stackProfilePro = FALSE;
selected = FALSE;
for ( stackProfile = 0; stackProfile < STACK_PROFILE_MAX; stackProfile++ )
{
pNwkDesc = nwk_getNwkDescList();
for ( i = 0; i < ResultCount; i++, pNwkDesc = pNwkDesc->nextDesc )
{
if ( zgConfigPANID != 0xFFFF )
{
// PAN Id is preconfigured. check if it matches
if ( pNwkDesc->panId != zgConfigPANID )
continue;
}
if ( nwk_ExtPANIDValid( ZDO_UseExtendedPANID) == true )
{
// If the extended Pan ID is commissioned to a non zero value
// Only join the Pan that has match EPID
if ( osal_ExtAddrEqual( ZDO_UseExtendedPANID, pNwkDesc->extendedPANID) == false )
continue;
}
// check that network is allowing joining
if ( ZSTACK_ROUTER_BUILD )
{
if ( stackProfilePro == FALSE )
{
if ( !pNwkDesc->routerCapacity )
{
continue;
}
}
else
{
if ( !pNwkDesc->deviceCapacity )
{
continue;
}
}
}
else if ( ZSTACK_END_DEVICE_BUILD )
{
if ( !pNwkDesc->deviceCapacity )
{
continue;
}
}
// check version of zigbee protocol
if ( pNwkDesc->version != _NIB.nwkProtocolVersion )
continue;
// check version of stack profile
if ( pNwkDesc->stackProfile != zgStackProfile )
{
if ( ((zgStackProfile == HOME_CONTROLS) && (pNwkDesc->stackProfile == ZIGBEEPRO_PROFILE))
|| ((zgStackProfile == ZIGBEEPRO_PROFILE) && (pNwkDesc->stackProfile == HOME_CONTROLS)) )
{
stackProfilePro = TRUE;
}
if ( stackProfile == 0 )
{
continue;
}
}
break;
}
if (i < ResultCount)
{
selected = TRUE;
break;
}
// break if selected or stack profile pro wasn't found
if ( (selected == TRUE) || (stackProfilePro == FALSE) )
{
break;
}
}
if ( i == ResultCount )
{
return (NULL); // couldn't find appropriate PAN to join !
}
else
{
return (pNwkDesc);
}
}// ZDApp_NwkDescListProcessing()
/*********************************************************************
* @fn ZDO_NetworkFormationConfirmCB
*
* @brief This function reports the results of the request to
* initialize a coordinator in a network.
*
* @param Status - Result of NLME_NetworkFormationRequest()
*
* @return none
*/
void ZDO_NetworkFormationConfirmCB( ZStatus_t Status )
{
nwkStatus = (byte)Status;
if ( Status == ZSUCCESS )
{
//HalUARTWrite(0,"-Coord net success-\n",20);
debug("Э<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɹ<EFBFBD>\n");
// LED on shows Coordinator started
HalLedSet ( HAL_LED_3, HAL_LED_MODE_ON );
// LED off forgets HOLD_AUTO_START
//HalLedSet (HAL_LED_4, HAL_LED_MODE_OFF);
#if defined ( ZBIT )
SIM_SetColor(0xd0ffd0);
#endif
if ( devState == DEV_HOLD )
{
// Began with HOLD_AUTO_START
devState = DEV_COORD_STARTING;
}
}
#if defined(BLINK_LEDS)
else
{
HalLedSet ( HAL_LED_3, HAL_LED_MODE_FLASH ); // Flash LED to show failure
}
#endif
osal_set_event( ZDAppTaskID, ZDO_NETWORK_START );
}
/****************************************************************************
* @fn ZDApp_beaconIndProcessing
*
* @brief This function processes the incoming beacon indication.
*
* When another task (MT or App) is registered to process
* beacon indication themselves, this function will parse the
* beacon payload and pass the beacon descriptor to that task
* If no other tasks registered, this function will process
* the beacon payload and generate the network descriptor link
* list.
*
* @param
*
* @return none
*
*/
void ZDO_beaconNotifyIndCB( NLME_beaconInd_t *pBeacon )
{
// Pass the beacon Indication to another task if it registers the callback
// Otherwise, process the beacon notification here.
if (zdoCBFunc[ZDO_BEACON_NOTIFY_IND_CBID] != NULL )
{
zdoCBFunc[ZDO_BEACON_NOTIFY_IND_CBID]( (void*)pBeacon );
}
else
{
networkDesc_t *pNwkDesc;
networkDesc_t *pLastNwkDesc;
uint8 found = false;
// Add the network to the Network Descriptor List
pNwkDesc = NwkDescList;
pLastNwkDesc = NwkDescList;
while (pNwkDesc)
{
if ((pNwkDesc->panId == pBeacon->panID) &&
(pNwkDesc->logicalChannel == pBeacon->logicalChannel))
{
found = true;
break;
}
pLastNwkDesc = pNwkDesc;
pNwkDesc = pNwkDesc->nextDesc;
}
// If no existing descriptor found, make a new one and add to the list
if (found == false)
{
pNwkDesc = osal_mem_alloc( sizeof(networkDesc_t) );
if ( !pNwkDesc )
{
// Memory alloc failed, discard this beacon
return;
}
// Clear the network descriptor
osal_memset( pNwkDesc, 0, sizeof(networkDesc_t) );
// Initialize the descriptor
pNwkDesc->chosenRouter = INVALID_NODE_ADDR;
pNwkDesc->chosenRouterDepth = 0xFF;
// Save new entry into the descriptor list
if ( !NwkDescList )
{
NwkDescList = pNwkDesc;
}
else
{
pLastNwkDesc->nextDesc = pNwkDesc;
}
}
// Update the descriptor with the incoming beacon
pNwkDesc->stackProfile = pBeacon->stackProfile;
pNwkDesc->version = pBeacon->protocolVersion;
pNwkDesc->logicalChannel = pBeacon->logicalChannel;
pNwkDesc->panId = pBeacon->panID;
pNwkDesc->updateId = pBeacon->updateID;
// Save the extended PAN ID from the beacon payload only if 1.1 version network
if ( pBeacon->protocolVersion != ZB_PROT_V1_0 )
{
osal_cpyExtAddr( pNwkDesc->extendedPANID, pBeacon->extendedPanID );
}
else
{
osal_memset( pNwkDesc->extendedPANID, 0xFF, Z_EXTADDR_LEN );
}
// check if this device is a better choice to join...
// ...dont bother checking assocPermit flag is doing a rejoin
if ( ( pBeacon->LQI > gMIN_TREE_LINK_COST ) &&
( ( pBeacon->permitJoining == TRUE ) || ( _tmpRejoinState ) ) )
{
uint8 selected = FALSE;
uint8 capacity = FALSE;
if ( _NIB.nwkAddrAlloc == NWK_ADDRESSING_STOCHASTIC )
{
if ( ((pBeacon->LQI > pNwkDesc->chosenRouterLinkQuality) &&
(pBeacon->depth < MAX_NODE_DEPTH)) ||
((pBeacon->LQI == pNwkDesc->chosenRouterLinkQuality) &&
(pBeacon->depth < pNwkDesc->chosenRouterDepth)) )
{
selected = TRUE;
}
}
else
{
if ( pBeacon->depth < pNwkDesc->chosenRouterDepth )
{
selected = TRUE;
}
}
if ( ZSTACK_ROUTER_BUILD )
{
capacity = pBeacon->routerCapacity;
}
else if ( ZSTACK_END_DEVICE_BUILD )
{
capacity = pBeacon->deviceCapacity;
}
if ( (capacity) && (selected) )
{
// this is the new chosen router for joining...
pNwkDesc->chosenRouter = pBeacon->sourceAddr;
pNwkDesc->chosenRouterLinkQuality = pBeacon->LQI;
pNwkDesc->chosenRouterDepth = pBeacon->depth;
}
if ( pBeacon->deviceCapacity )
pNwkDesc->deviceCapacity = 1;
if ( pBeacon->routerCapacity )
pNwkDesc->routerCapacity = 1;
}
}
}
/*********************************************************************
* @fn ZDO_StartRouterConfirmCB
*
* @brief This function reports the results of the request to
* start functioning as a router in a network.
*
* @param Status - Result of NLME_StartRouterRequest()
*
* @return none
*/
void ZDO_StartRouterConfirmCB( ZStatus_t Status )
{
nwkStatus = (byte)Status;
if ( Status == ZSUCCESS )
{
// LED on shows Router started
HalLedSet ( HAL_LED_3, HAL_LED_MODE_ON );
// LED off forgets HOLD_AUTO_START
HalLedSet ( HAL_LED_4, HAL_LED_MODE_OFF);
if ( devState == DEV_HOLD )
{
// Began with HOLD_AUTO_START
devState = DEV_END_DEVICE;
}
}
#if defined(BLINK_LEDS)
else
{
HalLedSet( HAL_LED_3, HAL_LED_MODE_FLASH ); // Flash LED to show failure
}
#endif
osal_set_event( ZDAppTaskID, ZDO_ROUTER_START );
}
/*********************************************************************
* @fn ZDO_JoinConfirmCB
*
* @brief This function allows the next hight layer to be notified
* of the results of its request to join itself or another
* device to a network.
*
* @param Status - Result of NLME_JoinRequest()
*
* @return none
*/
void ZDO_JoinConfirmCB( uint16 PanId, ZStatus_t Status )
{
(void)PanId; // remove if this parameter is used.
nwkStatus = (byte)Status;
if ( Status == ZSUCCESS )
{
// LED on shows device joined
HalLedSet ( HAL_LED_3, HAL_LED_MODE_ON );
// LED off forgets HOLD_AUTO_START
HalLedSet ( HAL_LED_4, HAL_LED_MODE_OFF);
if ( (devState == DEV_HOLD) )
{
// Began with HOLD_AUTO_START
devState = DEV_NWK_JOINING;
}
if ( !ZG_SECURE_ENABLED )
{
// Notify to save info into NV
ZDApp_NVUpdate();
}
}
else
{
#if defined(BLINK_LEDS)
HalLedSet ( HAL_LED_3, HAL_LED_MODE_FLASH ); // Flash LED to show failure
#endif
}
// Pass the join confirm to higher layer if callback registered
if (zdoCBFunc[ZDO_JOIN_CNF_CBID] != NULL )
{
zdoJoinCnf_t joinCnf;
joinCnf.status = Status;
joinCnf.deviceAddr = _NIB.nwkDevAddress;
joinCnf.parentAddr = _NIB.nwkCoordAddress;
zdoCBFunc[ZDO_JOIN_CNF_CBID]( (void*)&joinCnf );
}
// Notify ZDApp
ZDApp_SendMsg( ZDAppTaskID, ZDO_NWK_JOIN_IND, sizeof(osal_event_hdr_t), (byte*)NULL );
}
/*********************************************************************
* @fn ZDO_AddrChangeIndicationCB
*
* @brief This function notifies the application that this
* device's address has changed. Could happen in
* a network with stochastic addressing (PRO).
*
* @param newAddr - the new address
*
* @return none
*/
void ZDO_AddrChangeIndicationCB( uint16 newAddr )
{
ZDO_AddrChangeInd_t *pZDOAddrChangeMsg;
epList_t *pItem = epList;
// Notify to save info into NV
ZDApp_NVUpdate();
// Notify the applications
osal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );
while (pItem != NULL)
{
if (pItem->epDesc->endPoint != ZDO_EP)
{
pZDOAddrChangeMsg = (ZDO_AddrChangeInd_t *)osal_msg_allocate( sizeof( ZDO_AddrChangeInd_t ) );
if (pZDOAddrChangeMsg != NULL)
{
pZDOAddrChangeMsg->hdr.event = ZDO_ADDR_CHANGE_IND;
pZDOAddrChangeMsg->shortAddr = newAddr;
osal_msg_send( *(pItem->epDesc->task_id), (uint8 *)pZDOAddrChangeMsg );
}
}
pItem = pItem->nextDesc;
}
// Send out a device announce
ZDApp_AnnounceNewAddress();
}
/*********************************************************************
* @fn ZDO_JoinIndicationCB
*
* @brief This function allows the next higher layer of a
* coordinator to be notified of a remote join request.
*
* @param ShortAddress - 16-bit address
* @param ExtendedAddress - IEEE (64-bit) address
* @param CapabilityFlags - Association Capability Flags
* @param type - of joining -
* NWK_ASSOC_JOIN
* NWK_ASSOC_REJOIN_UNSECURE
* NWK_ASSOC_REJOIN_SECURE
*
* @return ZStatus_t
*/
ZStatus_t ZDO_JoinIndicationCB(uint16 ShortAddress, uint8 *ExtendedAddress,
uint8 CapabilityFlags, uint8 type)
{
(void)ShortAddress;
(void)ExtendedAddress;
#if ZDO_NV_SAVE_RFDs
(void)CapabilityFlags;
#else // if !ZDO_NV_SAVE_RFDs
if (CapabilityFlags & CAPINFO_DEVICETYPE_FFD)
#endif
{
ZDApp_NVUpdate(); // Notify to save info into NV.
}
if (ZG_SECURE_ENABLED) // Send notification to TC of new device.
{
if (type == NWK_ASSOC_JOIN || type == NWK_ASSOC_REJOIN_UNSECURE)
{
osal_start_timerEx( ZDAppTaskID, ZDO_NEW_DEVICE, 600 );
}
}
return ZSuccess;
}
/*********************************************************************
* @fn ZDO_ConcentratorIndicationCB
*
* @brief This function allows the next higher layer of a
* device to be notified of existence of the concentrator.
*
* @param nwkAddr - 16-bit NWK address of the concentrator
* @param extAddr - pointer to extended Address
* NULL if not available
* @param pktCost - PktCost from RREQ
*
* @return void
*/
void ZDO_ConcentratorIndicationCB( uint16 nwkAddr, uint8 *extAddr, uint8 pktCost )
{
zdoConcentratorInd_t conInd;
conInd.nwkAddr = nwkAddr;
conInd.extAddr = extAddr;
conInd.pktCost = pktCost;
if( zdoCBFunc[ZDO_CONCENTRATOR_IND_CBID] != NULL )
{
zdoCBFunc[ZDO_CONCENTRATOR_IND_CBID]( (void*)&conInd );
}
}
/*********************************************************************
* @fn ZDO_LeaveCnf
*
* @brief This function allows the next higher layer to be
* notified of the results of its request for this or
* a child device to leave the network.
*
* @param cnf - NLME_LeaveCnf_t
*
* @return none
*/
void ZDO_LeaveCnf( NLME_LeaveCnf_t* cnf )
{
// Check for this device
if ( osal_ExtAddrEqual( cnf->extAddr,
NLME_GetExtAddr() ) == TRUE )
{
// Pass the leave confirm to higher layer if callback registered
if ( ( zdoCBFunc[ZDO_LEAVE_CNF_CBID] == NULL ) ||
( (*zdoCBFunc[ZDO_LEAVE_CNF_CBID])( cnf ) == NULL ) )
{
// Prepare to leave with reset
ZDApp_LeaveReset( cnf->rejoin );
}
}
else if ( ZSTACK_ROUTER_BUILD )
{
// Remove device address(optionally descendents) from data
ZDApp_LeaveUpdate( cnf->dstAddr,
cnf->extAddr,
cnf->removeChildren );
}
}
/*********************************************************************
* @fn ZDO_LeaveInd
*
* @brief This function allows the next higher layer of a
* device to be notified of a remote leave request or
* indication.
*
* @param ind - NLME_LeaveInd_t
*
* @return none
*/
void ZDO_LeaveInd( NLME_LeaveInd_t* ind )
{
uint8 leave;
// Parent is requesting the leave - NWK layer filters out illegal
// requests
if ( ind->request == TRUE )
{
// Notify network of leave
if ( ZSTACK_ROUTER_BUILD )
{
NLME_LeaveRsp_t rsp;
rsp.rejoin = ind->rejoin;
rsp.removeChildren = ind->removeChildren;
NLME_LeaveRsp( &rsp );
}
// Prepare to leave with reset
ZDApp_LeaveReset( ind->rejoin );
}
else
{
leave = FALSE;
// Check if this device needs to leave as a child or descendent
if ( ind->srcAddr == NLME_GetCoordShortAddr() )
{
if ( ( ind->removeChildren == TRUE ) ||
( ZDO_Config_Node_Descriptor.LogicalType ==
NODETYPE_DEVICE ) )
{
leave = TRUE;
}
}
else if ( ind->removeChildren == TRUE )
{
// Check NWK address allocation algorithm
//leave = RTG_ANCESTOR(nwkAddr,thisAddr);
}
if ( leave == TRUE )
{
// Prepare to leave with reset
ZDApp_LeaveReset( ind->rejoin );
}
else
{
// Remove device address(optionally descendents) from data
ZDApp_LeaveUpdate( ind->srcAddr,
ind->extAddr,
ind->removeChildren );
}
}
// Pass the leave indication to higher layer if callback registered.
if (zdoCBFunc[ZDO_LEAVE_IND_CBID] != NULL)
{
(void)zdoCBFunc[ZDO_LEAVE_IND_CBID](ind);
}
}
/*********************************************************************
* @fn ZDO_SyncIndicationCB
*
* @brief This function allows the next higher layer of a
* coordinator to be notified of a loss of synchronization
* with the parent/child device.
*
* @param type: 0 - child; 1 - parent
*
*
* @return none
*/
void ZDO_SyncIndicationCB( uint8 type, uint16 shortAddr )
{
(void)shortAddr; // Remove this line if this parameter is used.
if ( ZSTACK_END_DEVICE_BUILD
|| (ZSTACK_ROUTER_BUILD && ((_NIB.CapabilityFlags & ZMAC_ASSOC_CAPINFO_FFD_TYPE) == 0)))
{
if ( type == 1 )
{
// We lost contact with our parent. Clear the neighbor Table.
nwkNeighborInitTable();
// Start the rejoin process.
ZDApp_SendMsg( ZDAppTaskID, ZDO_NWK_JOIN_REQ, sizeof(osal_event_hdr_t), NULL );
}
}
}
/*********************************************************************
* @fn ZDO_ManytoOneFailureIndicationCB
*
* @brief This function allows the next higher layer of a
* concentrator to be notified of a many-to-one route
* failure.
*
* @param none
*
*
* @return none
*/
void ZDO_ManytoOneFailureIndicationCB()
{
// By default, the concentrator automatically redo many-to-one route
// discovery to update all many-to-one routes in the network
// If you want anything processing other than the default,
// please replace the following code.
RTG_MTORouteReq();
}
/*********************************************************************
* @fn ZDO_PollConfirmCB
*
* @brief This function allows the next higher layer to be
* notified of a Poll Confirm.
*
* @param none
*
* @return none
*/
void ZDO_PollConfirmCB( uint8 status )
{
(void)status; // Remove this line if this parameter is used.
return;
}
/******************************************************************************
* @fn ZDApp_NwkWriteNVRequest (stubs AddrMgrWriteNVRequest)
*
* @brief Stub routine implemented by NHLE. NHLE should call
* <AddrMgrWriteNV> when appropriate.
*
* @param none
*
* @return none
*/
void ZDApp_NwkWriteNVRequest( void )
{
#if defined ( NV_RESTORE )
if ( !osal_get_timeoutEx( ZDAppTaskID, ZDO_NWK_UPDATE_NV ) )
{
// Trigger to save info into NV
ZDApp_NVUpdate();
}
#endif
}
/*********************************************************************
* Call Back Functions from Security - API
*/
/*********************************************************************
* @fn ZDO_UpdateDeviceIndication
*
* @brief This function notifies the "Trust Center" of a
* network when a device joins or leaves the network.
*
* @param extAddr - pointer to 64 bit address of new device
* @param status - 0 if a new device joined securely
* - 1 if a new device joined un-securely
* - 2 if a device left the network
*
* @return true if newly joined device should be allowed to
* remain on network
*/
ZStatus_t ZDO_UpdateDeviceIndication( uint8 *extAddr, uint8 status )
{
// can implement a network access policy based on the
// IEEE address of newly joining devices...
(void)extAddr;
(void)status;
return ZSuccess;
}
/*********************************************************************
* @fn ZDApp_InMsgCB
*
* @brief This function is called to pass up any message that is
* not yet supported. This allows for the developer to
* support features themselves..
*
* @return none
*/
void ZDApp_InMsgCB( zdoIncomingMsg_t *inMsg )
{
if ( inMsg->clusterID & ZDO_RESPONSE_BIT )
{
// Handle the response message
}
else
{
// Handle the request message by sending a generic "not supported".
// Device Announce doesn't have a response.
if ( !(inMsg->wasBroadcast) && inMsg->clusterID != Device_annce )
{
ZDP_GenericRsp( inMsg->TransSeq, &(inMsg->srcAddr), ZDP_NOT_SUPPORTED, 0,
(uint16)(inMsg->clusterID | ZDO_RESPONSE_BIT), inMsg->SecurityUse );
}
}
}
/*********************************************************************
* @fn ZDApp_ChangeMatchDescRespPermission()
*
* @brief Changes the Match Descriptor Response permission.
*
* @param endpoint - endpoint to allow responses
* @param action - true to allow responses, false to not
*
* @return none
*/
void ZDApp_ChangeMatchDescRespPermission( uint8 endpoint, uint8 action )
{
// Store the action
afSetMatch( endpoint, action );
}
/*********************************************************************
* @fn ZDApp_NetworkInit()
*
* @brief Used to start the network joining process
*
* @param delay - mSec delay to wait before starting
*
* @return none
*/
void ZDApp_NetworkInit( uint16 delay )
{
if ( delay )
{
// Wait awhile before starting the device
osal_start_timerEx( ZDAppTaskID, ZDO_NETWORK_INIT, delay );
}
else
{
osal_set_event( ZDAppTaskID, ZDO_NETWORK_INIT );
}
}
/*********************************************************************
* @fn ZDApp_NwkStateUpdateCB()
*
* @brief This function notifies that this device's network
* state info has been changed.
*
* @param none
*
* @return none
*/
void ZDApp_NwkStateUpdateCB( void )
{
// Notify to save info into NV
if ( !osal_get_timeoutEx( ZDAppTaskID, ZDO_NWK_UPDATE_NV ) )
{
// Trigger to save info into NV
ZDApp_NVUpdate();
}
}
/*********************************************************************
* @fn ZDApp_NodeProfileSync()
*
* @brief Sync node with stack profile.
*
* @param stackProfile - stack profile of the network to join
*
* @return none
*/
void ZDApp_NodeProfileSync( uint8 stackProfile )
{
if ( ZDO_Config_Node_Descriptor.CapabilityFlags & CAPINFO_DEVICETYPE_FFD )
{
if ( stackProfile != zgStackProfile )
{
ZDO_Config_Node_Descriptor.LogicalType = NODETYPE_DEVICE;
ZDO_Config_Node_Descriptor.CapabilityFlags = CAPINFO_DEVICETYPE_RFD | CAPINFO_POWER_AC | CAPINFO_RCVR_ON_IDLE;
NLME_SetBroadcastFilter( ZDO_Config_Node_Descriptor.CapabilityFlags );
}
}
}
/*********************************************************************
* @fn ZDApp_StartJoiningCycle()
*
* @brief Starts the joining cycle of a device. This will only
* continue an already started (or stopped) joining cycle.
*
* @param none
*
* @return TRUE if joining stopped, FALSE if joining or rejoining
*/
uint8 ZDApp_StartJoiningCycle( void )
{
if ( devState == DEV_INIT || devState == DEV_NWK_DISC )
{
continueJoining = TRUE;
ZDApp_NetworkInit( 0 );
return ( TRUE );
}
else
return ( FALSE );
}
/*********************************************************************
* @fn ZDApp_StopJoiningCycle()
*
* @brief Stops the joining or rejoining process of a device.
*
* @param none
*
* @return TRUE if joining stopped, FALSE if joining or rejoining
*/
uint8 ZDApp_StopJoiningCycle( void )
{
if ( devState == DEV_INIT || devState == DEV_NWK_DISC )
{
continueJoining = FALSE;
return ( TRUE );
}
else
return ( FALSE );
}
/*********************************************************************
* @fn ZDApp_AnnounceNewAddress()
*
* @brief Send Device Announce and hold all transmissions for
* new address timeout.
*
* @param none
*
* @return none
*/
void ZDApp_AnnounceNewAddress( void )
{
#if defined ( ZIGBEE_NWK_UNIQUE_ADDR_CHECK )
// Turn off data request hold
APSME_HoldDataRequests( 0 );
#endif
ZDP_DeviceAnnce( NLME_GetShortAddr(), NLME_GetExtAddr(),
ZDO_Config_Node_Descriptor.CapabilityFlags, 0 );
#if defined ( ZIGBEE_NWK_UNIQUE_ADDR_CHECK )
// Setup the timeout
APSME_HoldDataRequests( ZDAPP_HOLD_DATA_REQUESTS_TIMEOUT );
#endif
}
/*********************************************************************
* @fn ZDApp_NVUpdate
*
* @brief Set the NV Update Timer.
*
* @param none
*
* @return none
*/
void ZDApp_NVUpdate( void )
{
#if defined ( NV_RESTORE )
osal_start_timerEx( ZDAppTaskID, ZDO_NWK_UPDATE_NV, ZDAPP_UPDATE_NWK_NV_TIME );
#endif
}
/*********************************************************************
* @fn ZDApp_CoordStartPANIDConflictCB()
*
* @brief Returns a PAN ID for the network layer to use during
* a coordinator start and there is another network with
* the intended PANID.
*
* @param panid - the intended PAN ID
*
* @return PANID to try
*/
uint16 ZDApp_CoordStartPANIDConflictCB( uint16 panid )
{
return ( panid + 1 );
}
/*********************************************************************
* @fn ZDO_SrcRtgIndCB
*
* @brief This function notifies the ZDO available src route record received.
*
* @param srcAddr - source address of the source route
* @param relayCnt - number of devices in the relay list
* @param relayList - relay list of the source route
*
* @return none
*/
void ZDO_SrcRtgIndCB (uint16 srcAddr, uint8 relayCnt, uint16* pRelayList )
{
zdoSrcRtg_t srcRtg;
srcRtg.srcAddr = srcAddr;
srcRtg.relayCnt = relayCnt;
srcRtg.pRelayList = pRelayList;
if( zdoCBFunc[ZDO_SRC_RTG_IND_CBID] != NULL )
{
zdoCBFunc[ZDO_SRC_RTG_IND_CBID]( (void*)&srcRtg );
}
}
/*********************************************************************
* @fn ZDApp_InitZdoCBFunc
*
* @brief Call this function to initialize zdoCBFunc[]
*
* @param none
*
* @return none
*/
void ZDApp_InitZdoCBFunc( void )
{
uint8 i;
for ( i=0; i< MAX_ZDO_CB_FUNC; i++ )
{
zdoCBFunc[i] = NULL;
}
}
/*********************************************************************
* @fn ZDO_RegisterForZdoCB
*
* @brief Call this function to register the higher layer (for
* example, the Application layer or MT layer) with ZDO
* callbacks to get notified of some ZDO indication like
* existence of a concentrator or receipt of a source
* route record.
*
* @param indID - ZDO Indication ID
* @param pFn - Callback function pointer
*
* @return ZSuccess - successful, ZInvalidParameter if not
*/
ZStatus_t ZDO_RegisterForZdoCB( uint8 indID, pfnZdoCb pFn )
{
// Check the range of the indication ID
if ( indID < MAX_ZDO_CB_FUNC )
{
zdoCBFunc[indID] = pFn;
return ZSuccess;
}
return ZInvalidParameter;
}
/*********************************************************************
* @fn ZDO_DeregisterForZdoCB
*
* @brief Call this function to de-register the higher layer (for
* example, the Application layer or MT layer) with ZDO
* callbacks to get notified of some ZDO indication like
* existence of a concentrator or receipt of a source
* route record.
*
* @param indID - ZDO Indication ID
*
* @return ZSuccess - successful, ZInvalidParameter if not
*/
ZStatus_t ZDO_DeregisterForZdoCB( uint8 indID )
{
// Check the range of the indication ID
if ( indID < MAX_ZDO_CB_FUNC )
{
zdoCBFunc[indID] = NULL;
return ZSuccess;
}
return ZInvalidParameter;
}
/*********************************************************************
*********************************************************************/